Select TURN ON and the current angle and mirror setting will be recorded. • This feature may not function properly if the projector is not in a stable position when TURN ON is selected. 4.1-2 If this function is set to TURN ON when the vertical angle of the projector or mirror setting at which the projector is turned on is different than the previously recorded the Transition Detector Alarm will be displayed and the projector will not display the input signal. Set the Transition Detector off in

(continued on next page) SCREEN Menu SCREEN Menu (continued) Item Description MyScreen This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and START UP screen. Display the image you want to capture before executing the following procedure. 1. Selecting this item displays a dialog titled “MyScreen”. It will ask you if you start capturing an image from the current screen. Please wait for the target image to be displayed, and press the ENTER bu

Be sure to read “Safety Guide” first. After reading them, store them in a safe place for future reference. About this manual Various symbols are used in this manual. The meanings of these symbols are described below. WARNING This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling. CAUTION This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect hand

Before using this projector, please read these instructions. Declaration of Conformity Manufacturer: InFocus Corporation, 27500 SW Parkway Ave. Wilsonville, Oregon 97070 USA European Office: Olympia 1, NL- 1213 NS Hilversum, The Netherlands We declare under our sole responsibility that the LP650 projector conforms to the following directives and norms: EMC Directive 89/336/ EEC, Amended by 93/ 68/ EEC EMC: EN 55022 EN 55024 EN 61000-3-2 EN 61000-3-3 Low Voltage Directive 73/23/ EEC, Amended by 9

(in the US) For product disposal, contact your local government agency or (in the US) or (in Canada). For more information, call your dealer. • If the lamp should break (it will make a loud bang when it does), unplug the power cord from the outlet, and make sure to request a replacement lamp from your local dealer. Note that shards of glass could damage the inside of the projector, or cause injury during handling, so please do not try to clean the projector or replace the lamp yourself. • If the

WARNING >Before using this product, please read the "User's Manual - Safety Guide" and related manuals to ensure the proper use of this product. After reading them, store them in a safe place for future reference. NOTE • The information in this manual is subject to change without notice. • The manufacturer assumes no responsibility for any errors that may appear in this manual. • The reproduction, transfer or copy of all or any part of this document is not permitted without express written conse

To prepare a new air filter, contact your dealer and tell the air filter type number. Type number = NJ22222 And also when you replace the lamp, please replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector. 1. Turn the projector off, and unplug the power cord. Allow the lamp to cool for at least 45 minutes. 2. When the projector is suspended from the ceiling, apply the vacuum cleaner to and around the filter cover first, to prevent p

To change the settings, refer to the AUDIO item in the SETUP menu. Y R L AUDIO IN2 AUDIO OUT CONTROL RGB IN1 RGB IN2 USB RGB OUT AUDIO IN1 VIDEO S-VIDEO CB/PB CR/PR K Y R L AUDIO IN2 AUDIO OUT CONTROL RGB IN1 RGB IN2 USB RGB OUT AUDIO IN1 VIDEO S-VIDEO CB/PB CR/PR K Y R L AUDIO IN2 AUDIO OUT CONTROL RGB IN1 RGB IN2 USB RGB OUT AUDIO IN1 VIDEO S-VIDEO CB/PB CR/PR K RGB IN2 RGB OUT RGB in Stereo mini audio cable Connecting to a monitor (output) Connecting to a speaker with amplifier (output) Use t

Functional overview 3. Set up 4. Installation 4 Packaging contents 4 Optional accessories 5 Service accessories 5 6-9 Controls 6-7 Remote control 8 Connections 9 10-12 Positioning the projector and screen 10 Switching on the projector 10 Adjusting the focus and size of the image 11 Adjusting the vertical and horizontal angle of the projector 11 To raise the projector 11 To lower the projector 11 Keystone correction 11 Moving/transporting the projector 11 Preparation 11 Moving/transporting the pr

Please read this manual carefully in order to use the projector properly. After reading this, please keep it in a safe place together with the warranty sheet. . Features • Three handy features in a single body.The projector for the multimedia age 1. Documents, catalogs and other printed matter can be projected directly from the scanner. This frees the user from the need to make OHP film inserts for each document. 2. Personal computer screens can be projected. This allows the user to make detaile