Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Acer Dateigröße: 810.6 kb Dateiname: manual-t25.pdf Unterrichtssprache:

In power mode it’s not necessary to connect the second (blue) USB cable with your PC/Notebook. 2. USB Mode: In USB mode, both USB cables (black for data and blue for power) need to be connected with T25. The brightness can reach 18 peak lumens in USB mode. System Requirements Your system should have at least the following specifications to make PocketCinema T25 working smoothly on your system: Operating System: Windows XP SP2 or higher, Windows Vista, Windows 7 CPU: Dual Core CPU or higher RAM: 2GB DDR RAM or higher Interface: 2x free USB 2.0 Ports (1x free USB port if AC adapter is used) Hard Disk: 50MB free space Install the Driver Before using the projector to projection, you need to install the Pico Projector driver on your Notebook/PC. 1. Use USB cable to connect the device to your Notebook/PC. The T25 is detected as mass storage device and a pop-up window appear. Click the icon to open the folder and than “Pico Projector.exe” to start the driver installation. 2. The Setup Wizard will appear to select the language you prefer. Simply follow the on-screen instructions to continue the installation. 3. During the driver installation, Hardware Installation dialog may pops up. Please click Continue Anyway on the Hardware Installation dialog window. For Windows XP For Windows Vista /7 4. When the driver installation is completed, Computer Restart dialog will pops up. Please choose “Yes” to reboot your computer, and then click “Finish” to close the program. 5. After rebooting, Pico Projector is installed in your Notebook/PC successfully. Start the Projection After installation, you will find Pico Projector icon on your desktop. Click on the icon to start the projection. After a few seconds the Control Panel of the projector will appear on the screen and the projections starts automatically. Then the control icon of Pico Projector will appear in the function bar next to the clock. The Control Panels shows three functions: 1. Full Screen: The projected image has same resolution like your PC. The picture is displayed 1:1 and shrinked to the native resolution of the Pico Projector automatically. Use this mode on powerful PC’s if you need the full resolution. 2. Compatible Mode: In compatible mode the resolution of your PC is reduced to 800x600 pixel and projects with T25. The advantage is a maybe better picture quality and better preformance of your system. 3. Exit: This mode will turn off the projector and close the driver. Please remember that every time you want to use the projector please follow the steps like below: 1. Use USB cable to connect the projector with your Notebook/PC. Use second USB or adapter for needed power. 2. Open the Pico Projector application by clicking the icon on desktop. 3. Choose the best mode for your projection. Using a Netbook with Atom CPU or other single core processor may influence the performance of your system. Some ideas might help to make the projection more smoothly. 1. To adjust the resolution of video under 640x...

Herunterladen

Geben Sie zwei Ziffern: