Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Contents
Precautions with regard to safety
Preparation
OSD POSITION..............................41
IMPORTANT SAFETY NOTICE..........2
ASPECT .........................................41
WARNING
Precautions with regard to safety ....5
RESIZING.......................................42
If a problem occurs (such as no image or no sound) or if you notice
Accessories........................................9
AUTO SETUP.................................42
FRAME LOCK ................................42
smoke or a strange smell coming from the projector, turn off the power
Precautions on handling .................10
Audio adjustment.............................43
and disconnect the mains lead from the mains socket.
Location and function of
each part........................................12
VOLUME ........................................43
B Do not continue to use the projector in such cases, otherwise fire or
MUTE .............................................43
Preparation
Using the remote control unit.........18
electric shocks could result.
Laser beam pointer.........................18
Changing the display language......43
B Check that no more smoke is coming out, and then contact an Authorised
Wireless mouse ..............................19
Advanced Operation
Service Centre for repairs.
Inserting the batteries .....................20
Option settings.................................44
B Do not attempt to repair the projector yourself, as this can be dangerous.
Operating range..............................20
SHUTTER.......................................44
Setting the projector IDs number for remote control unit ...21
Do not install this projector in a place which is not strong enough to
OSD................................................44
Connections .....................................22
AUTO KEYSTONE .........................44
take the full weight of the projector.
Notes on connections .....................22
RGB/YPbPr ....................................44
B If the installation location is not strong enough, it may fall down or tip over,
Example of connecting to video
RGB2 SELECT...............................44
and severe injury or damage could result.
equipment ...................................24
BACK COLOR ................................45
Example of connecting to
FRONT/REAR ................................45
Installation work (such as ceiling suspension) should only be carried
computer .....................................25
DESK/CEILING ..............................45
out by a qualified technician.
Setting-up .........................................26
LAMP POWER ...............................45
B If installation is not carried out correctly, there is the danger that injury or
Projection methods.........................26
LAMP RUN TIME ...........................45
electric shocks may occur.
Projector position............................26
FAN CONTROL..............................45
Projection distances .......................27
WEB CONTROL.............................45
If foreign objects or water get inside the projector, or if the projector is
Basic Operation
WEB STANDBY .............................45
dropped or the cabinet is broken, turn off the power and disconnect the
Starting to use..................................28
WEB PASSWORD .........................46
mains lead from the mains socket.
Turning on the power......................28
CONTROL KEY..............................46
B Continued use of the projector in this condition may result in fire or electric
Turning off the power......................29
FUNC 1...........................................46
shocks.
On-screen menus.............................30
SET ID ............................................46
AUTO POWER OFF.......................46
B Contact an Authorised Service Centre for repairs.
Menu screens .................................30
Menu operation guide.....................33
NETWORK SETUP ...........................47
Do not overload the mains socket.
Returning to the previous screen....33
SD CARD SETUP..............................47
B If the power supply is overloaded (for example, by using too many
Returning a setting to the factory default ...34
Lens adjustment ..............................48
Projection lens replacement ...........49
adapters), overheating may occur and fire may result.
Using the freeze function ................34
Using the D.ZOOM (digital zoom) function...35
Projection distance for each
Do not remove the cover or modify it in any way.
Adjusting the picture .......................36
projection lens (sold separately) ..50
B High voltages which can cause fire or electric shocks are present inside
PICTURE MODE ............................36
Slot cover replacement ...................52
the projector.
Colour Hue Setting .........................37
Putting the mains lead and
remote control unit away .............53
B For any inspection, adjustment and repair work, please contact an
COLOR...........................................37
Using the cable cover......................54
Authorised Service Centre.
TINT................................................37
BRIGHT ..........................................37
Using the remote terminal...............55
Clean the mains plug regularly to prevent it from becoming covered in
CONTRAST....................................37
Using the SERIAL connector ..........56
dust.
SHARPNESS .................................37
Others
B If dust builds up on the mains plug, the resulting humidity can damage the
Noise Reduction(NR)......................37
Indicators..........................................58
insulation, which could result in fire. Pull the mains lead out from the mains
TV SYSTEM ...................................37
About the automatic setup function......60
WHITE BALANCE R/G/B ...............38
socket and wipe it with a dry cloth.
List of compatible signals...............61
Projecting sRGB-compatible pictures ...38
Cleaning and replacing the air filter...62
B If not using the projector for an extended period of time, pull the mains
Adjusting the position .....................39
Replacing the lamp unit ..................63
plug out from the mains socket.
POSITION ......................................40
Before calling for service ................66
DOT CLOCK...................................40
Specifications...................................68
CLOCK PHASE ..............................40
Dimensions.......................................70
KEYSTONE ....................................40
Trademark acknowledgements ......70
4-ENGLISH
ENGLISH-5
...Dieses Handbuch ist für folgende Modelle:
Projektoren - PTL780E (2.65 mb)