Stimmen - 1, Durchschnittliche Bewertung: 5 ( )

Hersteller: Barco Dateigröße: 14.05 mb Dateiname: 1cfa9194-ea92-4b6e-a380-7c5e626180d1.pdf Unterrichtssprache:

The horizontal sync polarity setting can be useful in case of a bad shaped edge, one can choose between the leading (active low) or trailing (active high) edge. The input format settings are used to "tell more" about the signals connected on the BNC’s, it completes the information in the source selection menu. -RGB is selected by default and means that an RGB signal is connected to the BNC’s -PR/Y/PB must be selected whenever: R59770134 ID LR-6 27/05/2011 6.Advanced • a progressive signal (32 kHz frequency video signal ) is connected to the BNC’s (select the source with Data on BNC’s in the Source selection menu). • one wants (in PiP mode) to visualize the component video signal in a Data window hereby adding a video image in the PiP layout. -HDTV-PR/Y/PB for high definition component video signals. It is recommended to use the default values. 6.8.4 Rename file How to rename a file ? 1. Press MENU to activate the Tool bar 2. Press > to select the Image files item 3. Press v to Pull down the Image files menu 4. Use ^ or v to select Rename Image 6-97 5. Press ENTER A dialog box is displayed Image 6-98 6. Use ^ or v to select the desired file 7. Press ENTER R59770134 ID LR-6 27/05/2011 6.Advanced A text box is displayed Image 6-99 Use , v or ^ the numeric keys on the remote, or the keypad to edit and change the values, confirm with ENTER. 6.8.5 Copy How to copy a file ? 1. Press MENU to activate the Tool bar 2. Press > to select the Image files item 3. Press v to Pull down the Image files menu 4. Use ^ or v to select copy Image 6-100 5. Press ENTER A dialogbox is displayed Image 6-101 6. Use ^ or v to select the desired file 7. Press ENTER A text box is displayed Image 6-102 Use , v or ^ on the remote, or the keypad to enter the new name, confirm with ENTER. R59770134 ID LR-6 27/05/2011 6.Advanced If the AutoImage function does not succeed in finding a file and no file is loaded (load list is empty), which means that the source is not displayed, then use the copy function: Copy a standard file (.std) which is not too different of the source to display, then edit this file to get the best image. 6.8.6 Delete How to delete a file ? 1. Press MENU to activate the Tool bar 2. Press > to select the Image files item 3. Press v to Pull down the Image files menu 4. Use ^ or v to select delete Image 6-103 5. Press ENTER A dialog box is displayed Image 6-104 6. Use ^ or v to select the desired file 7. Press ENTER The selected file is deleted and is removed from the list 6.8.7 Forced file load What can be done ? Forced file load allows to force or lock one particular custom file to be loaded for one particular input. This way one can guarantee that the same desired file is always used for a particular source. For each layer (layer 1, layer 2, layer 3) we can enable or disable the forced file load. The specification for the file to be selected for each input on that layer is done via RS232. see the RS232 User Guide for more information on the Forced file load command to be sent. How to set a file to be loaded ? 1. Press MENU to activate the Tool bar R59770134 ID LR-6 27/05/2011 6.Advanced 2. Press > to select the Image files item 3. Press v to Pull down the Image files menu 4. Use ^ or v to select Forced file load 5. Press > to open the menu Image 6-105 6. Use ^ or v to select the desired layer 7. Press ENTER Forced file load is activated for this layer (this is shown with a bullet) 6.9 Display Setup Overview • Full screen representation • Startup screen • Textbox • Take screenshot • Menu bar position • Status bar position • Sliderbox position • AutoImage Setup • Blanking • Soft Edge 6.9.1 Full screen representation Purpose of the Full screen representation The Full screen representation function forces to use the complete native resolution of the LCD panels independently of the native resolution of the source. Note that the full screen representation does not preserve the aspect ratio of the source, i.e. when the aspect ratio of the active image is not the same as the projector (in this case 1920/1080 or 1.77:1), the image will end to be distorted (stretched or shrinked). How to enable/disable the full screen representation ? 1. Press MENU to activate the Tool bar 2. Press > to select the Display setup item 3. Press v to Pull down the Display setup menu 4. Use ^ or v to select Full screen representation 5. Press > to pull down the menu 6. Use v or ^ to select ON or OFF R59770134 ID LR-6 27/05/2011 6.Advanced 7. Press ENTER The full screen representation will not guarantee the best image quality, therefore the Show native resolution has to be selected. The show native resolution function on the other hand forces to use the native resolution of the source. The Full screen representation function overrules the show native resolution function. The aspect ratio setting is greyed out when enabling the full screen representation. 6.9.2 Startup screen What can be done ? When the startup screen is enabled, the identifica...

Herunterladen

Geben Sie zwei Ziffern: