Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
Resizing auf Originalauflosung (Pixel) Compatibilite ordinateur au redimensionnement Compatibilidad del ordenador ajustada a la resolucion pixels. Resolucion en pixels Compatibilita computer (riclassificata in base alla risoluzione pixel originaria) 640x480 720x400 720x400 800x600 800x600 832x624 832x624 1024x768 1024x768 1152x870 1280x1024 Video compatibility Videokompatibilitat Compatibilite video Compatibilidad de video Compatibilita video PAL BGHI, N, combination N, M. NTSC M, N, 4.43, Japan. SECAM corriente de la resolution d'origine (pixels) Videofrekvens Horisontal synk. Vertikal synk. Datamaskin-inngang Lydinngang Hoyttalere Oppfyller kravene til Stromforsyning Datamaskinkompatibilitet, storrelse endret til naturlig pikselopplosning Videokompatibilitet PROJECTOR UNIT PROJEKTOR/ GERAT PROJECTEUR PROYECTOR UNITA DEL PROIETTORE PROJEKTORENHETEN PROJECTION DISTANCES PROJEKTIONSABSTANDE DISTANCES DE PROJECTION DISTANCIAS DE PROYECCION DISTANZE DI PROIEZIONE PROJEKSJONSAVSTANDER WIDE Distance Diagonal Width Height WEITWINKEL Entfernung Diagonale Breite Hohe GRAND ANGULAIRE Distancia Diagonal Largeur Hauteur GRAN ANGULAR Distance Diagonale Ancho Alto GRANDANGOLO Distanza Diagonale Larghezza Altezza VIDVINKEL Avstand Diagonal Bredde Hoyde 1.1-10m/3.6-32.5 ft 1.1-10m/3.6-32.5 ft. 0.7-6.5m/2.3-21.1 ft 0.7-6.5m/2.3-21.1 ft. 0.6-5.2m/1.9-16.9 ft 0.6-5.2m/1.9-16.9 0.5-3.9m/1.6-12.7 ft 0.5-3.9m/1.6-12.7 TELE Distance Diagonal Width Height TELEOBJEKTIV Entfernung Diagonale Breite Hohe TELEOBJECTIF Distancia Diagonal Largeur Hauteur TELEOBJETIVO Distancia Diagonal Ancho Alto TELEOBIETTIVO Distanza Diagonale Larghezza Altezza TELE Avstand Diagonal Bredde Hoyde 1.1-10m/3.6-32.5 ft 0.6-5.2m/1.9-16.9 ft 0.5-4.2m/1.6-13.7 ft 4,2m/13,7 0.35-3.2m/1.1-10.4 ft 0.35-3.2m/1.1-10.4 ft. Variation of +/- 10%. Abweichung von +/- 10% Variation de +/- 10% Variazione di +/- 10% Variacion de +/- 10% Variasjon pa +/- 10% C2 COMPACT /C6 COMPACT 19 1152x864 TECHNICAL DATA TECHNISCHE DATEN CARACTERISTIQUES TECHNIQUES DATOS TECNICOS DATI TECNICI TEKNISKE DATA Subject to change Anderungen vorbehalten Sous reserve de modifications Sujetos a posibles cambios Soggetti a modifica Kan endres 12-150MHz 15-100KHz 43.5-130 Hz 0-1Vpp 1VRMS 2x1 W CE, UL, CUL Subpart J, Part 15 PAL, BGHI, N, TECHNICAL DATA TECHNISCHE DATEN CARACTERISTIQUES TECHNIQUES DATOS TECNICOS DATI TECNICI TEKNISKE DATA CONNECTORS ANSCHLUSSE CONNECTEURS CONECTORES CONNETORI KONTAKTER 15 610 11151 2 3 4 5 6 7 8 15 HIGH DENSITY DSUB FEMALE 1 Analog R IN 2 Analog G IN 3 Analog B IN 4 AGND 5 AGND 6 Analog R GND IN 7 Analog G GND IN 8 Analog B GND IN 9 Reserved 10 Sync GND IN 11 AGND 12 DDC/SDA 13 HSync IN 14 VSync IN 15 DDC/SCL 8 PIN MINIDIN FEMALE 1 Mac ADB 2 PS/2 clock 3 PS/2 data 4 RS232 TXD 5 Not used 6 RS 232 RXD 7 RS 232 CTS 8 GND DIGITAL USB 12 3 4 1 VCC 2 - Data 3 +Data 4 GND MOUSE 1USB MOUSE 2 COMPUTER MONITOR 15 610 1115 15 HIGH DENSITY DSUB FEMALE 1 Analog R OUT 2 Analog G OUT 3 Analog B OUT 4 Reserved 5 AGND 6 Analog R GND OUT 7 Analog G GND OUT 8 Analog B GND OUT 9 Reserved 10 Sync GND OUT 11 Not used 12 DDC/SDA 13 HSync OUT 14 VSync OUT 15 DDC/SCL 2 1 34 4 PIN MINIDIN FEMALE 1 GND 2 GND 3 Luma 4 Common 3.5 mm JACK TIP: right RING: left STEM: common PHONO/RCA FEMALE STEM: composite SHIELD: GND AUDIO LINE OUTCOMP IN VIDEO IN VIDEO S-VIDEO 3.5 mm JACK TIP: right RING: left STEM: common 3.5 mm JACK TIP: right RING: left STEM: common L FCC STATEMENT ing device, pursuant to Subpart J of Part 15 of FCC rules. Only peripherals (computer input/output devices, terminals, printers, etc.) certified to comply with the Class A limits may be attached to a computer that complies with Class A limits. When connecting to a peripheral device, a shielded input/output cable is required to ensure compliance with FCC rules. The shielded cable that must be used is supplied with the equipment. Operation with non-certified peripherals or non-shielded cables is likely to result in interference to radio and TV reception. , if not installed and used in accordance with the instruction manual, may cause interference to radio and television reception. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart J of Part 15 of the FCC rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient the receiving antenna. Relocate the projector with respect to the receiver. Plug the equipment to a different outlet so that equipment and receiver are on different branch circuits. Fasten cables using mounting screws to...