Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
4 INPUT key Selects the input signal. Each time you press the key, the input signal switches as follows: INPUT A t MS t VIDEO t S VIDEO t (VPL-CX6 only) 1 I / 1 (on/standby) key Turns on the projector when the projector is in standby mode. The ON/ STANDBY indicator around the I / 1 key lights in green when the power is turned on. When turning off the power, press the I / 1 key twice following the message on the screen, or press and hold the key for about two seconds. 5 Lens protector (lens cover) The lens protector automatically opens when the power is turned on. 6 Front remote control detector 7 Ventilation holes (exhaust) GB 10 Location and Function of Controls 8 Control/Connector panel For details, see “Control Panel” and “Connector Panel” on page 12. 9 Rear remote control detector 0 Ventilation holes (intake) qa Ventilation holes (intake)/Lamp cover qs Powered tilt adjuster qd Adjuster (hind pad) Turn the adjuster to the right or left for minor tilt adjustment of the projected picture. qf Speaker qg Security lock Connects to an optional security cable (Kensington’s). Web page address: qh Focus ring Adjusts the picture focus. qj Zoom ring Adjusts the picture size. qk Ventilation holes (intake)/airfilter cover How to use the powered tilt adjuster To adjust the height Adjust the height of the projector as follows: 1 Press the I / 1 key The lens protector opens, and the powered tilt adjuster rises automatically. The adjuster stops at its previously adjusted position. Powered tilt adjuster 2 Press f or F of the TILT key to adjust the tilt of the projector. You may press the KEYSTONE key (VPL-CS6/CX6) or the D KEYSTONE key (VPL-EX1) on the Remote Commander to display the Tilt menu and adjust the tilt using the M/m/Dieses Handbuch ist für folgende Modelle:
Projektoren - VPL-CX6 (2.54 mb)
Projektoren - VPL-EX1 (2.54 mb)