Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
You can project images from an external signal source just by connecting the equipment with the supplied cable and pushing the APA key. • Easy-to-use Remote Commander The Remote Commander is equipped with various convenient keys, including the D ZOOM key for zooming in on the image, the FREEZE key for keeping the image projected even if the equipment is disconnected, and the D KEYSTONE key for correcting trapezoidal distortion of the picture. Accepts various input signals • Scan converter loaded This projector has a build-in scan converter that converts the input signal within 800 . 600 dots. • Compatible input signals This projector accepts video signals of composite, S video, and component as well as VGA, SVGA, and XGA signals, which all can be displayed. • Compatible with six color systems NTSC, PAL, SECAM, NTSC4.431), PALM, or PAL-N color system can be selected automatically or manually. 1)NTSC4.43 is the color system used when playing back a video recorded on NTSC on a NTSC4.43 system VCR. ...................................................................... • Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries. • VGA, SVGA and XGA are registered trademarks of the International Business Machines Corporation, U.S.A. • Macintosh is a registered trademark of Apple Computer, Inc. • IBM PC/AT is a registered trademark of International Business Machines Corporation, U.S.A. • VESA is a registered trademark of Video Electronics Standard Association. • Display Data Channel is a trademark of Video Electronics Standard Association. • PC-98 is a trademark of NEC Corporation. Overview 7 7 GB Features 1 Front cover Location and Function of Controls Front/Side/Bottom Rear/Left Side Press the OPEN button to open the front cover. 2 OPEN button 3 Lamp cover (bottom) 4 Front remote control detector (SIRCS receiver) 5 Indicators • LAMP/COVER: Lights up or flashes under the following conditions: – Lights up when the lamp has reached the end of its life or becomes a high temperature. – Flashes when the lamp cover or air filter cover is not secured firmly. • TEMP (Temperature)/FAN: Lights up or flashes under the following conditions: – Lights up when temperature inside the projector becomes unusually high. – Flashes when the fan is broken. • POWER SAVING: Lights up when the projector is in power saving mode. When POWER SAVING in the SET SETTING menu is set to ON, the projector goes into power saving mode if no signal is input for 10 minutes. Although the lamp goes out, the cooling fan keeps running. In power saving mode, any key does not function for the first 60 seconds. The power saving mode is canceled when a signal is input or any key is pressed. • ON/STANDBY: Lights up or flashes under the following conditions: – Lights in red when a AC power cord is plugged into a wall outlet. Once in standby mode, you can turn on the projector with the I / 1 key. – Lights in green when the power is turned on. – Flashes in green while the cooling fan runs after the power is turned off with the I / 1 key. The fan runs for about 90 seconds after the power is turned off. The ON/STANDBY indicator flashes quickly for the first 60 GB 8 Location and Function of Controls seconds. During this time, you cannot light up the ON/STANDBY indicator with the I / 1 key. For details on the LAMP/COVER and the TEMP/FAN indicators, see on pages 32, 33. 6 Security lock (right side) Connects to an optional security cable (Kensington’s). The security lock corresponds to Kensington’s MicroSaver® Security System. If you require further information, contact Kensington 2855 Campus Drive San Mateo, CA 94403 In North America Phone: 800-235-6708 Fax: 800-247-1317 Outside North America Phone: 847-541-9500 Home page address: 7 Control panel For details, see “Control Panel” on page 10. 8 Ventilation holes (exhaust) 9 Focus lever Adjusts the picture focus. q; q;q;q;q;Zoom lever Adjusts the picture size. qa qaqaqaqaAdjuster adjustment buttons For details,see “How to use the adjuster” on page 10. qs qsqsqsqsAC IN socket Connects the supplied AC power cord. qd qdqdqdqdVentilation holes (intake)/air filter cover Notes • Do not place anything near the ventilation holes as it may cause internal heat build-up. • Do not place your hand or objects near the ventilation holes as it may cause the air coming out heat build-up. • To maintain optimal performance, clean the air filter every 300 hours. qf qfqfqfqfConnector panel For details, see “Connector Panel” on page 11. qg qgqgqgqgRear remote control detector (SIRCS receiver) How to open/close the front cover To open the front cover Press the OPEN button. The front cover is opened and set on the top panel of the projector. To close the front cover Restore the front cover by hand. Note Do not tilt the projector out of the range of the adjuster setting when you open the front cover. If the projector is tilted too much, the front cover opens speedily or slo...