Stimmen - 4, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Toshiba Dateigröße: 2.66 mb Dateiname: Unterrichtssprache:

No power . Problem with projector • Unplug the power cord, and contact your dealer. Lamp went out during use, or won’t come on . Lamp temperature is high so that it is difficult to turn on, the lifetime of the lamp has ended or the projector is malfunctioning. • Unplug the power cord and wait for a short while, then turn the power back on. • If a lamp burns out, replace it with a new one. . After approx. one minute of abnormal display, the projector returns to the standby state waiting for internal cool down. Power went out during use . Internal overheating, or the outside temperature is too high. • Place the projector so that the air intake and exhaust are not blocked. • Unplug the power cord and wait for a short while, then turn the power back on. . The icon will appear before the power goes out. . After approx. one minute of abnormal display, the projector returns to the standby state waiting for internal cool down. Power went out during use . Problem with internal cooling fan. • Unplug the power cord, and contact your dealer. . The icon will appear before the power goes out. . After approx. one minute of abnormal display, the projector returns to the standby state waiting for internal cool down. Power went out during use, or power won’t come on . The lamp cover is not properly attached. • Unplug the power cord, and reattach the lamp cover. p.36 . After approx. one minute of abnormal display, the projector returns to the standby state waiting for internal cool down. Power went out during use . Problem inside the projector. • Unplug the power cord and wait for a short while, then turn the power back on. • If the above action will not clear the problem, unplug the power cord, and contact your dealer. . After approx. one minute of abnormal display, the projector returns to the standby state waiting for internal cool down. PRECAUTION • Make sure to unplug the power cord if something goes wrong. LAMP TEMP FAN .. LAMP TEMP FAN LAMP TEMP FAN (Off) Or (Orange lit) Or (Orange lit) (Red lit) (Red lit) LAMP TEMP FAN LAMP TEMP FAN (Red lit) (Green lit) (Red lit or flashing) (Red lit) (Red lit or flashing) (Orange flashing) (Red lit) (Red lit) (Green lit or Off) (Green flashing) (Green lit or Off) Trouble indications Others Specification s ¦ List of general Item Specification Consumption Power 260 W Weight 3.0 kg External Dimensions (including protruding parts) 285 . 98 . 254 mm (W . H . D) Cabinet material* PC+ABS resin and ABS resin Conditions for usage environment Temp: 5° C to 35° C; relative humidity: 30% to 70% Display pixels 1 chip DMD™ Picture elements 786,432 pixels (1024H . 768V) Lens Zoom lens F=2.0-2.2 f=19.41-23.32 mm Lamp High-pressure mercury lamp Projection screen size 31-300 inches Projection distance 1.26-10.50 m Speaker 1 W (Monaural) Connection terminal COMPUTER-1 terminal Mini D sub 15 pin RGB / Y/PB/PR (dual use) COMPUTER-2 terminal Mini D sub 15 pin RGB / Y/PB/PR (dual use) MONITOR terminal Mini D sub 15 pin RGB / Y/PB/PR (dual use) S-VIDEO terminal Mini DIN 4 pin AUDIO (L/R) terminal RCA Pin Jack . 2, 1.5 V (rms), 22 k . or more VIDEO terminal RCA Pin Jack, 1 V (p-p), 75 . AUDIO IN terminal o3.5mm dia. stereo mini-jack, 1.5V (rms); 22 k. or more AUDIO OUT terminal o3.5mm dia. stereo mini-jack CONTROL terminal Mini DIN 8 pin (RS-232C) * Each plastic part displays the materials it is made from, in order to facilitate recycling after this product becomes no longer usable. Note • Design, specifications, etc. subject to change without notice for improvements, etc. 40 ¦ List of supported This projector supports the following RGB signals. Note, however, that depending on computer model, the show flicker or streaking. Please adjust the projector this happens. (Press the SET UP button, and adjust automatically p.27 , p.28 ) Resolution Mode Refresh rate (Hz) H-frequency (kHz) Clock (MHz) 720 x 400 720x400_85 85.039 37.927 35.500 640 x 480 VGA_60 59.940 31.469 25.175 VGA_72 72.809 37.861 31.500 VGA_75 75.000 37.500 31.500 VGA_85 85.008 43.269 36.000 800 x 600 SVGA_56 56.250 35.156 36.000 SVGA_60 60.317 37.879 40.000 SVGA_72 72.188 48.077 50.000 SVGA_75 75.000 46.875 49.500 SVGA_85 85.061 53.674 56.250 832 x 624 MAC16" 74.550 49.725 57.283 1024 x 768 XGA_60 60.004 48.363 65.000 XGA_70 70.069 56.476 75.000 XGA_75 75.029 60.023 78.750 XGA_85 84.997 68.667 94.500 MAC19" 74.700 60.134 79.857 1152 x 864 SXGA1_75 75.000 67.500 108.000 1280 x 960 QuadVGA_60 60.000 60.000 108.000 QuadVGA_85 85.002 85.938 148.500 1280 x 1024 SXGA3_60 60.020 63.981 108.000 SXGA3_75 75.025 79.976 135.000 1400 x 1050 SXGA+ 59.978 65.317 121.750 1600 x 1200 UXGA_60 60.000 75.000 162.000 UXGA_65 65.000 81.250 175.500 UXGA_70 70.000 87.500 189.000 UXGA_75 75.000 93.750 202.500 Note • Signals which resolution exceeds the native resolution (1024 . 768 pixels) will be compressed. For this reason, some information may be lost, or image quality may be affected. 41 Others Specifications ¦ List of supported PR signals) Signal format fh(kHz) fv...

Herunterladen

Geben Sie zwei Ziffern: