Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Toshiba Dateigröße: 1.23 mb Dateiname: Unterrichtssprache:

See foot adjuster on p.17 . Adjust the volume. Adjust the volume from the remote control. Note • Lamp characteristics may rarely cause the 1 23 brightness to fluctuate slightly. • A lamp is consumable item. If used for extended periods, images will appear dark, and the lamp could burn out. This is characteristic of a lamp, and is not malfunction. (The lifetime of the lamp depends on conditions of use.) • The DLP® chip is made using extremely advanced technology. There may be black spots (pixels that do not light) or bright spots (pixels that are constantly lit) on the panel. These are intrinsic characteristics of the technology and are not malfunctions. • Although this projector supports a wide range of RGB signals , any signal formats not matched to native resolution of this projector (XGA) will be expanded or shrunk, which will affect image quality slightly. To view high-quality images, set the computer's external output to XGA. p.49 • With some models of computer having LCD displays or the like, displaying images simultaneously on the projector and the monitor’s display may prevent the images from displaying properly. If this happens, turn off the computer’s LCD display. For information on how to turn off the LCD display, see the computer's owner's manual. • When [Auto input search] is set to [Off] in the Default setting menu (factory setting is [On]), the Input select menu appears if you press the INPUT button. If no signal is being input from the connected equipment or signal input is stopped while projecting, the "No signal" message will appear. • If a signal not supported by the projector is input, the "Unsupport signal" message will appear. • The factory setting for the OSD la ". Other languages can be selected in the Default setting menu. • If an unavailable operation button is pressedp.36 icon will appear. 30 31 Operations Using handy features Using auto setting (For computer input only) This function automatically sets up the projector to the optimum state. It sets up sampling phase, frequency and screen position, for each type of the input signal by using simple operations. .. Press the AUTO SET button on the remote control. For computer input, the icon will appear during processing. Note • The image may not be projected or auto adjustment/setting may not be performed correctly for input signals other than those supported by the projector , . • If auto setting fails adjustment, adjust manually with Image adjustment menu . Correcting the keystone distortion When the projector placement angle against the screen is changed while projecting the image, the picture will undergo keystone (trapezoidal) distortion. This projector can correct for this keystone distortion. .. Press the remote control’s KEYSTONE + / - button. You can also select [Keystone] in the Image adjustment menu . Note • Depending on the amount of keystone adjustment and the content of images, some information may be lost, or the picture quality may suffer. Cutting off the picture and sound temporarily (Mute) When you want to project the images of another projector, overhead projector, etc. temporarily, this projector’s images and sound can be turned off. .. Press the remote control’s MUTE button. The picture and sound are cut off. (The Mute function is released when pressing the MUTE button again.) Note • The icon will appear while mute is in effect. • Operating any other functions will also cancel the muting. Remote Control p.49 p.50 p.34 Remote Control Before correctIon After correction p.34 Remote Control Using handy features (continued) Freezing the image (Freeze) The projected image can be frozen. This function is used to pause video during a presentation, etc. • Press the FREEZE button on the remote control. The picture pauses. (The Freeze function is released by pressing the Remote Control FREEZE button again.) Note • The icon will appear while freeze is in effect. • Other operations will also release the freeze. • Although an image is frozen on the projector, the pictures are running on the video or other equipment. • If you use this function on commercial video software, broadcast or cable-broadcasting except for the purpose of your private viewing and listening, it may infringe the copyright protected by the copyright laws. 32 Using the menus , .p.18 p.19 You can call up on-screen menus, and make adjustments and settings using the operation buttons on the control panel (main unit side) and remote control How to use the menus The menu shown below is for operation instructions purposes and might differ from the actual display. 1. Press the MENU button. 2. Select a Category The Setting display menu appears. Select a category by using . There are following 4 categories. Image adjustment menu Display setting menu Default setting menu Status display menu Displays the current adjustments and settings of the selected category.Item shown with gray cannot be adjusted with the current input source. p.34 p.35 p.36 p.37 Press the button...

Herunterladen

Geben Sie zwei Ziffern: