Stimmen - 5, Durchschnittliche Bewertung: 4.4 ( )

Hersteller: Toshiba Dateigröße: 2.1 mb Dateiname: Unterrichtssprache:

H.POS * ----------30 ~ +30 -------Moves display position of projected images in horizontal direction. INSTALLATION... RGB & COMPONENT AUTO YES? FREQUENTCY 0 PHASE 15 H. POS 0 V. POS 0 V. POS *----------30~ +30 --------Moves display position of projected images in vertical direction. MIRROR ------FLOOR FRONT -----Select this setting with the projector set on the floor when viewing the projected images from the front side.Normally, select this setting. ----------CEILING FRONT ----Select this setting with the projector suspended from the ceiling when viewing the projected images from the front side. ------------FLOOR REAR ------Select this setting with the projector set on the floor when viewing the projected images from the rear side of the screen. -----------CEILING REAR -----Select this setting with the projector suspended from the ceiling when viewing the projected images from the rear side of the screen. KEYSTONE ----12~+ 12 --------Select this setting when correcting trapezoidal distortion. Normally, select “0”. PATTERN-----------------------------------Pressing ENTER button reveals the test pattern for focus adjustment. • The items with * mark function only for 1080i, 720p, 525p, and 625p input signals and input signals from DVI terminal. • The varying range of the vertical position depends on the type of the input signal. With some values the vertical position may not change, but this is not a failure. • With the inputs from DVI-DIGITAL terminal, no change appear on the projected images with adjustment of the dividing ratio and fine, but this is not a failure. • Without input signals, only some of the above items can be changed. On the memory for projected image quality This projector allows each item in the picture quality setting menu and the professional-use picture quality setting menu (except for color temperature use-adjustment) to be adjusted to up to three kinds of favorable picture quality for each input signal. Input that allows the setting Number of settings VIDEO 3 S-VIDEO 3 COMPONENT 1, 2 3 DVI-ANALOG/DIGITAL 3 To store the settings: (Refer to Page 25 for how to set menus.) 1. Set an item in the picture quality setting menu and the professional-use picture quality setting menu. 2. Reveal the signal setting menu. 3. Select “Store the setting “ by pressing {, } buttons. 4. Press ENTER button. The setting storage menu appears. 5. Select the memory where the setting is to be stored by pressing {, } buttons. 6. Press ENTER button. The setting is stored in the memory. To cancel the menus: 7. Press MENU button. To apply the set picture quality: 1. Press MEMORY1, 2, or 3 button. The picture quality of the projected image comes to the set quality. INSTALLATION... MEMORY 2 MEMORY 3 MEMORY 1 SAVE SETTING WITH MENUS Adjusting projected images Adjusting brightness of projected images (CONTRAST and BRIGHT) Items related to brightness of projected images are adjusted with menus. (Refer to Page 25 for setting menus.) 1 Reveal the picture quality setting menu. 2 Select “CONTRAST” or “BRIGHT” by pressing {, } buttons. 3 Adjust the selected item by pressing $, % buttons. To cancel the menus: 4 Press MENU button. PICTURE... CONTRAST BRIGHTNESS 0 0 CONTRAST ................... Adjusts vividness of projected picture images.Every time ? button is pressed, the images are made brighter and more vivid. Every time ? button is pressed, the images are made darker and less vivid. BRIGHT .......................... Every time ? button is pressed, the images are made brighter. Every time ? button is pressed, the images are made darker. Adjusting color (COLOR THICKNESS and TINT) Items related to color of projected images are adjusted with menus. (Refer to Page 25 for setting menus.) 1 Reveal the picture quality setting menu. 2 Select “COLOR THICKNESS” or “TINT” by pressing {, } buttons. 3 Adjust the selected item by pressing $, % buttons. To cancel the menus: 4 Press MENU button. 0 0 COLOR THICKNESS ..... Adjusts color thickness of projected picture images.Every time ? button is pressed, the colors are made thicker. Every time ? button is pressed, the colors are made thinner. TINT ............................... Adjusts tint of projected picture images.Every time ? button is pressed, the skin color of the projected images is made more reddish. Every time ? button is pressed, the skin color is made more greenish. Setting projected images sharper or softer (SHARPNESS) Sharpness of projected images are adjusted with menus. (Refer to Page 25 for setting menus.) 1 Reveal the picture quality setting menu. 2 Select “SHARPNESS” by pressing {, } buttons. 3 Adjust sharpness by pressing $ buttons. To cancel the menus: 4 Press MENU button. 0 Emphasizing or de-emphasizing a specified color of projected images (FOUR COLOR INDEPENDENT CONTROL) It is possible to emphasize or de-emphasize a specified color (RED, GREEN, BLUE, OR YELLOW) of projected images with menus. (Refer to Page 25 for setting menus.) 1. Reveal the professional-use pict...

Herunterladen

Geben Sie zwei Ziffern: