Stimmen - 1, Durchschnittliche Bewertung: 3 ( )

Hersteller: Toshiba Dateigröße: 5.86 mb Dateiname: Unterrichtssprache:

My Screen 45% MyScreen registration is finished. A capturing error has occurred. Please try again. Multifunctional Settings (continued) Multifunctional Settings (continued)Multifunctional Settings (continued) Multifunctional Settings (continued)Multifunctional Settings (continued) : SELECT MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION NETWORK VOLUME SPEAKER IR REMOTE IR REMOTE ID LAMP TIME FILTER TIME SERVICE RESET 16 TURN ON 1: 2: 3: ALL 1234 h 4321 h Item Description VOLUME Adjust the volume using the / buttons. : High Low SPEAKER Select the TURN ON or the TURN OFF using the / buttons. : TURN ON TURN OFF When the TURN ON is selected, the built-in speaker works. IR REMOTE Select a remote sensor using the / button (1), then switch it using the ENTER button (2). : (1) 1 : FRONT 2 : TOP 3 : REAR (2) (Off) (On) memo A sensor cannot be turned off when the other two are off. Always at least one sensor is on. OPTION IR REMOTE 1 : FRONT 2 : TOP 3 : REAR ENT IR REMOTE ID Select a number as an ID number for remote control using the / buttons. : ALL 1 2 3 The projector is controlled by the remote control whose ID CHANGE switch is set into the position of the same number as this number. When the ALL is selected, the projector is controlled by a remote control irrespective of the position of the ID CHANGE switch. memo Please refer to the section “Using The Remote ID Feature”. LAMP TIME Pressing the RESET button for about 3 seconds displays the LAMP TIME menu. Select the RESET using button to reset the timer. : RESET CANCEL Selecting the RESET resets the count of the lamp timer to 0. memo Perform this function only when you have replaced the lamp. The lamp timer counts the used time of the current lamp, to display the messages about the lamp. Incorrect performing causes incorrect operation of the messages. memo About replacing the lamp, please refer to the section” Lamp”. FILTER TIME Pressing the RESET button for about 3 seconds displays the FILTER TIME menu. Select the RESET using button to reset the timer. : RESET CANCEL Selecting the RESET resets the count of the lamp timer to 0. memo Perform this function only when you have cleaned or replaced the air filter. The filter timer counts the used time of the air filter after cleaning or replacement, to display the messages about the air filter. Incorrect performing causes incorrect operation of the messages. memo About caring for the air filter, please refer to the section “Air Filter”. (This table is continued to the following page.) 41 Multifunctional Settings (continued) Multifunctional Settings (continued)Multifunctional Settings (continued) Multifunctional Settings (continued)Multifunctional Settings (continued) Item Description SERVICE Pressing the (or the ENTER) button calls the SERVICE menu. SERVICE Menu Select an item using the / buttons, and press the (or the ENTER) button to per form each function. : FANSPEED • AUTO ADJUST • LENS TYPE • LENS LOCK : SELECT SERVICE FANSPEED AUTO ADJUST LENS TYPE LENS LOCK NORMAL ENABLE AUTO TURN OFF FANSPEED Select the fan speed level using the / buttons. : HIGH • NORMAL The HIGH ups rotation speeds of fans, though. Please use this function in using a projector at highlands etc. memo Note that the projector is noisier when the HIGH is selected. AUTO ADJUST Select the ENABLE or the DISABLE using the / buttons. : ENABLE • DISABLE When you want to keep the current adjustment state, select the DISABLE. When the ENABLE is selected, detecting a signal change to a RGB signal performs the automatic adjustment of the vertical position (V POSITION), the horizontal position (H POSITION), the clock phase (H PHASE) and the horizontal size (H SIZE). LENS TYPE Select the lens type currently used using the / buttons. : AUTO • 1 • 2 • 3 • 4 • 5 Please select depending on the following. AUTO: automatically selects optimum mode. 1: for a standard lens 2: for a fixed short throw lens 3: for a short throw lens 4: for a long throw lens 5: for a super long throw lens memo This setting has an influence on the keystone distortion etc. memo About the optional lens, ask your dealer. LENS LOCK Select the TURN ON or the TURN OFF using the / buttons. : TURN ON • TURN OFF Selecting the TURN ON locks the adjustment of the lens shift, the zoom and the focus. RESET Select the EXECUTE using the button to reset the OPTION menu items. : EXECUTE • CANCEL The items of the OPTION menu are collectively returned to the initial setting. Note that the items “VOLUME”, “LAMP TIME”, “FILTER TIME” and “SERVICE” are not reset. Multifunctional Settings (continued) Multifunctional Settings (continued)Multifunctional Settings (continued) Multifunctional Settings (continued)Multifunctional Settings (continued) This projector provides the NETWORK function. If you use this function, please set up the projector according to the Network environment in which you use it. memo If DHCP function on your Network is activated, the following operation is not normally required, becaus...

Herunterladen

Geben Sie zwei Ziffern: