Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Toshiba Dateigröße: 5.64 mb Dateiname: Unterrichtssprache:

[ or : Enter setting mode] [ : Selection] Logo registration Press to display the registration menu. Display style Background Black Blue White Logo confirmation Press . Reset logo Yes No Detailed description [ Screen size] • If “Thru” is selected for [ Screen size], portions exceeding the native resolution (1024 . 768 pixels) will not appear on the screen. Note that for RGB signals with clock frequency 140MHz or lower, all input pixel signals are sampled. However, if the clock speed is higher than this, the RGB pixel signal is thinned before sampling. 39 Operations Using Note • If you use the screen setting function on broadcast or cable-broadcasting programs to display images with the varying aspect ratio except for the purpose of your private viewing and listening, it may infringe the copyright protected by the copyright laws. [ Up/down shift] Shifts the projected image vertically when [ Screen size] is [ Wide] . [ Blackboard mode] Projects the image in colors more like projecting on a screen. Precaution • The projected image may differ depending on the type, color, and material of the blackboard and wall even if the selected color is the same as the projected screen. [ Background] •TOSHIBA is set for [ Logo] by factory setting. • If user’s logo has been registered, it is displayed when [ Logo] is set for background. [ Start-up screen] If user’s logo has been registered and this setting is [ On], the logo is displayed at start-up. [ User logo] Registers a part of the image that is input from computer, as a stationary picture and displays it as a logo at start-up and when no signal is input. < Logo registration> How to register user logo 1 Select [User logo] in the Display setting menu, and press the or button. 2 Select from the displayed menu list and press the button. 3 The registration area is displayed for confirmation. Select [OK] or [Cancel] and press the button. • If the registered picture does not fall within the display area, operate the computer to scroll the screen. 4 Select [Yes] to register and press the button. 5 Registration starts. •A message is displayed while registration is in process. 40 Notes •You can register a logo • The area that can be . 384 dots at the center To register a company logo, prepare the image within • Only one logo can be registered. When a new image is registered, the old erased. • The time needed to register or display the image varies depending on the data size. • If you use this function on commercial broadcast or cable- broadcasting except for the purpose of your private viewing and listening, it may infringe the copyright protected by the copyright laws. < Display style> Select the size of the registered logo. : Displays the registered image in original size at center of the : Displays the registered image by enlarging fully in the screen. (As processed digitally, the image quality is degraded. ) < Background> Sets background color when [ Center] is selected for the logo [ Display style] . < Logo confirmation> You can preview the registered logo. < Reset logo> You can reset the registered logo, display style and background to the factory setting. (The logo set for the start-up screen and background is reset. ) Operations 41 Using ¦ The default This menu shows placement Default setting 1 menu Item Description No signal power off Set the time to wait for the power to be turned off after the last operation is made with no input signal. Off (not turned off) 30 min. Auto input search Set whether the input with signals is only selected On Off Beep Beep when operation is made. On Off Power on Sets whether to turn on the power when the ON/STANDBY button is pressed (Manual), or when the power cord is plugged in (Auto). Manual Auto Lamp power Sets the lamp power. Low Standard Detailed description [ Auto input search] Input select menu [ On]: Automatically searches the signals that Input select can be projected, and switches input Computer 1 from the connected device that outputs Y/PB/PR 1 the video signals each time the INPUT Computer 2 button is pressed. The input from the Y/PB/PR 2 connected device that outputs no video Video signals is skipped. S-video [ Off]: Displays the Input select menu. Toggle with / shows whether signal is buttons and press input or not. button. (The input without signals can be selected.) [ Power on] Note that if [ Power on] is set to [ Auto], then if the power is supplied when restored after a power outage, the projector will come on. [ Lamp power] When [ Lamp power] is set to [ Low], the screen becomes a little darker, but the cooling fan noise gets quieter. 42 Default setting Item Description Projection mode Sets projection mode in (Rear ceiling) (Standard) (Rear) (Ceiling) p.22 Fan mode Sets the cooling fan speed. Standard High Remote control When two or more projectors are used and controlled the remote control respectively, this menu sets the code for the projector and the remote control. [ or : Enter setting mode] [ : Se...

Herunterladen

Geben Sie zwei Ziffern: