Stimmen - 2, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: Toshiba Dateigröße: 1.81 mb Dateiname: Unterrichtssprache:

Take off the lens cover. 1 2 Operations Press ON/STANDBY. The projector turns on and the ON, LAMP and FAN indicators light in green. (The LAMP indicator blinks while the lamp is warming up.) The lamp lights and the start up display appears. ON / STANDBY FANTEMPLAMPON ON / STANDBY FANTEMPLAMPON (Green) (Green) (Green) (Green) (Green)(Green Flashing) 1 ON/STANDBY ON/STANDBY Notes • The startup screen disappears when you push the EXIT button or wait for a while. You can also set the startup screen not to be displayed on the menu screen. 50 • When a projector is used for the first time, the language selection menu is displayed after the startup screen disappears. Set it up with procedures 2 and 3 on the next page. Continued Projection on the screen (continued) CONTENTS 28 When a projector is used for the first time, the language selection menu, which is to select a language for displaying menus or messages, is displayed. Select a desired language. (At shipping from factory, it is set to English.) Remote control 2 2,3 OperationsPress ENTER to confirm. Press EXIT to return to step 2 if you want to re-select a language. 3 ENTER ENTER Select a desired language with the selection buttons ( / ), and press ENTER. A menu confirming the selection result is displayed in the selected language. 2 ENTER ENTER Notes • The language selection menu will not be displayed on the second and subsequent times you 51turn on the power. However, if “Reset all” is executed, the language selection menu will be displayed when the power is turned on next. • The language can also be selected on the menu screen. 49 • This Owner’s manual is described on the supposition that English was selected. Control panel (Main unit side) 2,3 2 MENU ON / INPUT ENTER CT-90106 KEYSTONE AUTO SET EXIT / P.MODE PIP FREEZE MUTE CALL RESIZE VOL / ADJ STANDBY KEYSTONE AUTOSET EXIT ON / STANDBY VOL / ADJ ENTER MENU INPUT FANTEMPLAMPON Continued 4 Turn on the connected equipment and put it in playback mode. Select “Cancel” or install driver contained in the supplied CD-ROM, when the dialog box of the Add New Hardware Wizard screen appears on the computer when connecting a computer. (The supplied CD-ROM contains a driver information file named TOSHIBA_TLP.inf. Click the Browse button of the dialog box to find and designate this file.) Projection on the screen (continued) CONTENTS 29 Select the input source to project. There are two kinds of methods as follows (5-a and 5-b.) Remote control 5-a,5-b Select the input source by pressing INPUT repeatedly. At shipping from factory, “Analog RGB” connected to COMPUTER connector or “Video” connected to VIDEO Jack can be selected. (You can select “Camera” when using the model with a document imaging camera.) The icon and the name of the selected input source appear on the screen...

Herunterladen

Geben Sie zwei Ziffern: