Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Casio Dateigröße: 5.27 mb Dateiname: Unterrichtssprache:

That is, it checks the RGB terminal and then the VIDEO terminal for an input signal. If it detects an input signal, the Data Projector will select it automatically and project the signal contents. In this case, however, either Viewer or Wireless will start up in the background, depending upon the type of USB device that is connected to the Data Projector. 8 Connecting to a USB Device while the Data Projector is On If you connect a USB device to the Data Projector’s USB port while it is turned on, it will perform one of the following operations (depending on its current plug-and-play setting). When plug-and-play is enabled: When this type of device is connected: The Data Projector does this automatically: USB memory device or USB card reader with memory card loaded Starts up Viewer (page 27) and projects the Viewer screen. YW-2 Wireless Adapter Starts up Wireless and projects the Wireless screen. YC-400/YC-430 Document Camera Starts up the YC Camera application (page 47) when the Document Camera is turned on and projects the YC Camera application screen. When plug-and-play is disabled: In this case, the image that is currently being projected does not change. However, Viewer, Wireless, or the YC Camera Application will start up in the background, depending upon the type of USB device that is connected to the Data Projector. Changing the Input Source while a USB Device is Connected On the Data Projector’s remote controller, press the [INPUT] key to change the input source. Each time you press the [INPUT] key, the Data Projector will check the RGB terminal, VIDEO terminal, and USB port for an input signal. If it finds a signal, it will select it as the input source automatically and project its contents. 9 Installing Data Projector Software Installing Data Projector Software Use the procedures in this section to install the software that comes bundled with the Data Projector onto your computer. When you want to do this: Install this software: Convert a PowerPoint file, PDF file, Web page, or other data to an image file that can be projected from the projector, and store it on a USB memory device or memory card EZ-Converter PRO • Convert PowerPoint files to image files, arrange the sequence of image files, and store data to a USB memory device or memory card • Convert image files to monochrome negatives for projection onto a blackboard EZ-Converter 1.1 Minimum System Requirements The following describes minimum computer system requirements to run the bundled software. • Operating System: Microsoft® Windows Vista®, Windows® XP SP2, or 2000 Professional SP4 • Computer: IBM PC/AT or compatible that conforms to the following conditions. • Windows Vista®, Windows® XP, or 2000 Professional pre-installed • PowerPoint 2000, 2002, 2003, or 2007 installed (to use EZ-Converter 1.1) • CPU: Pentium® III 800MHz or higher; CPU recommended for your computer’s operating system • Memory: 256MB minimum or amount of memory recommended for operating system being run • Hard Disk: At least 40MB for installation or at least 60MB when running • Display: Full-color display with resolution of at least 800 . 600 that is supported by above operating systems and the computer being used. • Input Device: Keyboard or other pointing device (mouse supported above operating system or equivalent device) • Normal operation may not be possible under certain hardware configurations. • Operation is not supported on a computer running Windows® NT, Me, 98SE, 98, 95, or 3.1, or on a Macintosh or Mac OS computer. • Operation on a computer upgraded to Windows Vista®, Windows® XP, or 2000 Professional from another operating system is not supported. • Operation is not supported under Windows Vista® 64-bit version. • Operation on a computer running Windows® XP Professional x64 Edition is not supported. 10 To install software 1 1 Place the bundled CD-ROM into your computer’s CD-ROM drive. • This displays the dialog box shown below. 2 2 Select the check box of the software you want to install. 3 3 Click the [Install] button. • This will start installation. 4 4 Keep clicking the [Next] button on the dialog boxes that appear. • If your computer is running Windows Vista and the dialog box shown below appears, click [Continue]. • If your computer is running Windows XP and the dialog box shown below appears, click the [Continue Anyway] button. • If your computer is running Windows 2000 and the message “The software you are about to install does not contain a Microsoft digital signature.” appears, click the [Yes] button. 11 • The dialog box shown below will appear after installation is complete. 5 5 Click the [Finish] button. 12 Projecting Presentation Images from a USB Memory Device or Memory Card Projecting Presentation Images from a USB Memory Device or Memory Card This section explains how to perform the following operations. • How to use the bundled EZ-Converter PRO and EZ-Converter 1.1 software to save image files to a USB memory device or memory card • How to ...

Herunterladen

Geben Sie zwei Ziffern: