Stimmen - 2, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Casio Dateigröße: 4.43 mb Dateiname: Unterrichtssprache:

Fotos und technische Daten  Casio  XJ-S31

Dieses Gerät hat auch andere Anweisungen:

Projektoren - XJ-S31 (4.31 mb)

Projektoren - XJ-S31 (6.66 mb)

2 2 Press the [ENTER] key. • This will display a full-size version of the image that fills the projection area. 3 3 To return to the file menu, press the [ESC] key. Note • If the selected file is too large to fit within the projection area, the message “Cannot display an image file.” will appear. • For information about operations you can perform while the image of a file is being projected, see “Operations during Image File Content Projection” (page 37). To start a slideshow from a particular image file 1 1 Use the cursor keys to select the file whose image from which you want to start the slideshow. 2 2 Press the [ ] key. • This will display a full-size version of the image that fills the projection area. Now the Data Projector will advance to the next image automatically at a regular interval (default: 5 seconds). • If “Manual” is selected for the “Image Switching” setting, the image will not change automatically. In this case, press the [..] key to advance to the next image. 3 3 To stop the slideshow and return to the file menu, press the [ESC] key. 33 Note • A slideshow displays the image files (jpg or bmp) that are included in the same folder as the image file you select in step 1 of the above procedure. All other files are ignored. • For details about operations you can perform during a slideshow, see “Operations during a Slideshow” (page 38). • For information about how you can specify the interval between images, image transition effects, and other playback settings, see “Configuring Viewer Setup Menu Settings” (page 41). • A slideshow that uses presentation data created with EZ-Converter 1.1 will be played back in accordance with the playback settings included in the presentation data. For details, see “To configure presentation data playback settings” (page 22). To move the highlighting to the previously projected image file 1 1 While the thumbnail view or tree view is being projected, press the [FUNC] key. • This will display the Viewer function menu. 2 2 Use the [..] key to move the highlighting to “Return to previously displayed image.” and then press the [ENTER] key. • This returns to the image file that was projected immediately before the last projected file. Note This function comes in handy in the following cases. • To return the highlighting to the last projected image file after projecting a movie file. • To return the highlighting to the image where a slideshow was paused in order to project a movie file. 34 Using the Presentation Menu The folder that contains the presentation file created using the EZ-Converter 1.1 software (page 19) that comes bundled with the Data Projector is called a “presentation folder”. Presentation folders appear along with other folders on the Viewer file menu, and they are indistinguishable from other folders. Because of this, Viewer also provides a “presentation menu” that makes it easy to find all of the presentation folders that are included on a USB memory device or memory card. To view the presentation menu 1 1 While the Viewer file menu is shown, press the [FUNC] key. • This displays the Viewer function menu shown below. 2 2 Check to make sure that “View Presentation List” is selected and then press the [ENTER] key. • This displays a presentation menu like the one shown below. Thumbnail of first image file in presentation Presentation properties Presentation path Presentation file menu 35 To perform a slideshow by running a presentation file 1 1 Use the [..] and [..] keys to move the highlighting to the presentation file you want to run. 2 2 Press the [ENTER] key or the [ ] key. • This will start the currently selected presentation file. • The image file sequence, display time for each image, and image transition effect will all be in accordance with the settings stored in the presentation file. For more information, see “To configure presentation data playback settings” on page 22. 3 3 To stop the slideshow, press the [ESC] key. Note • The file menu (not the presentation menu) will reappear after the slideshow stops when you press the [ESC] key or after it stops automatically. • For details about operations you can perform during a slideshow, see “Operations during a Slideshow” (page 38). To return to the file menu from the presentation menu Press the [ESC] key. 36 Operations during Image File Content Projection To scroll between image files Use the [..] and [..] keys. To do this: Press this key: Display the content of the next image file [..] Display the content of the previous image file [..] Note Scrolling to a file that is too large to fit within the projection area will cause the message “Cannot display an image file.” to appear. To rotate an image Use the [..] and [..] keys. To do this: Press this key: Rotate the image 90 degrees right [..] Rotate the image 90 degrees left [..] Note You can also rotate an image by pressing the [FUNC] key to display the Viewer function menu. Move the highlighting to “Rotate Right” or “Rotate Left” and then press ...

Herunterladen

Geben Sie zwei Ziffern: