Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Hersteller: Casio Dateigröße: 10.84 mb Dateiname: Unterrichtssprache:

Then you can plug the USB memory to the USB port of any computer and start up Wireless Connection 3 from there. This means it is not necessary to install Wireless Connection 3 from the CD-ROM on each computer that will connect with the projector over the wireless LAN. For more information, see “Using the Token Wizard” (page 39). 10 Establishing a Wireless LAN Connection between the Projector and a Computer Establishing a Wireless LAN Connection between the Projector and a Computer This section explains how to establish a wireless LAN connection between the projector and a computer under the projector’s initial default “Wireless” settings. “Wireless” is one of the projector’s built-in applications. It makes it possible to establish a wireless LAN connection between the projector and a computer, and project the computer’s display contents. Wireless LAN Connection and Projection Operation Flow The following shows the operation flow for projecting computer display contents when Wireless is configured with its initial default settings. Connect the wireless adapter to the projector. On the computer, start up Wireless Connection 3. On the computer, enter the login code. Establish a wireless LAN connection between the projector and computer, and project the computer screen contents from the projector. Note Under initial default settings, the projector performs wireless LAN communication using WPA-PSK AES security for comparatively secure wireless data communication. Data sent between the projector and computer is encrypted based on the projector’s built-in passphrase and login code. You can change the security system and the passphrase, if you want. Changing the passphrase periodically ensures that unauthorized parties cannot hack into your computer or projector. See “Configuring Security Settings for a Wireless LAN Connection” (page 18) for more information. D 11 Connecting the Wireless Adapter As shown in the figure below, connect the wireless adapter that comes with the projector to its USB port. *Caution Keep the wireless adapter that comes with the projector out of the reach of small children. Accidental swallowing of the product can interfere with proper breathing and create a life-threatening situation. Important! • Keep the wireless adapter in a safe place when it is not connected to the projector. • Never try to use the wireless adapter that comes with the projector with any other type of device. Note What happens when you connect a USB device while the projector is turned on depends on the projector’s current plug-and-play setting, which is enabled under initial default settings. • If you connect the wireless adapter to the projector while plug-and-play is enabled (On), the projector will automatically start up its Wireless application (page 13) and project the wireless standby screen. • If you connect the wireless adapter to the projector while plug-and-play is disabled (Off), the projected screen will not change but its Wireless application will start running in the background. In this case you need to use the [INPUT] key to change the input source to “USB” in order to display the wireless projection screen. For more details about the projector’s plug-and-play setting, see “Setup Menu Contents” in the User’s Guide on the CD-ROM that comes wit the projector. D 12 About the Projector’s Wireless Application Wireless is one of the projector’s built-in applications. It makes it possible to establish a wireless LAN connection between the projector and a computer, and project the computer’s display contents. To perform wireless projection Press the [INPUT] key and select “USB” as the input source. This will enable wireless projection. The Wireless standby screen will be projected if there is no wireless LAN connection between the projector and a computer. Wireless Standby Screen The Wireless standby screen displays the information described below. Display Item Description LOGIN CODE This is a four-digit number that must be input when establishing a wireless LAN connection between the projector and a computer under default Wireless settings. The number is updated to a new one whenever the projector is started up. SSID Projector’s current SSID. Server IP Projector’s current IP address. Channel Projector’s current channel number. Security Projector’s current security setting. For information about the meaning of SSID, IP address, and other terms used above, see “System Admin Page Settings” (page 37). 13 Wireless Connection 3 Wireless Connection 3 is control software for a computer that connects to the projector via wireless LAN connection. To start up Wireless Connection 3 Perform either of the following operations to start up Wireless Connection 3 on the computer. • Double-click the icon on your Windows desktop. • On your computer’s Windows Start menu, select [All Programs] - [CASIO] - [Wireless Connection 3]. Important! If your computer is running Windows Vista or Windows 7, starting up Wireless Connection 3 wi...

Herunterladen

Geben Sie zwei Ziffern: