Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Casio Dateigröße: 5.15 mb Dateiname: Unterrichtssprache:

This setting cannot be changed. 25 Starting and Stopping Projection from a Computer Connected via Wireless LAN Connection Starting 1-screen Projection On the computer from which you want to start 1-screen projection, click the button on the Wireless Connection 3 window. The button will change to and 1-screen projection will start from the computer. Performing this operation while projection is being performed from another computer will cancel the current projection and switch to projection from the computer where the operation was performed. At this time the wireless LAN connection is maintained between the projector and the computer whose projection was cancelled. Pausing 1-screen Projection On the computer from which you want to pause 1-screen projection, click the button on the Wireless Connection 3 window. This pauses the image that was being projected when you clicked the button, and the button will change to . To resume projection, click the button again. Stopping 1-screen Projection On the computer from which you want to stop 1-screen projection, click the button on the Wireless Connection 3 window. This stops 1-screen projection from the computer and projects the Wireless standby screen. At this time the wireless LAN connection is maintained between the projector and the computer whose projection was stopped, so the button can be clicked to restart 1-screen projection. To establish wireless LAN connections between the projector and multiple computers, and alternate between 1-screen projections 1. Establish a wireless LAN connection between the projector and the first computer. • This starts 1-screen projection from the first computer. 2. Establish wireless LAN connections between the same projector and the other computers. • Even as you connect to each computer, the 1-screen projection from the first computer is maintained. 3. On the second or one of the other subsequent computers, click the button on the Wireless Connection 3 window. • This will interrupt 1-screen projection from the first computer and switch to 1-screen projection from the computer whose button was clicked. • Next you can click the button on the Wireless Connection 3 window of any of the other connected computers to switch to 1-screen projection from that computer. 26 To project the display contents of four computers simultaneously (4-screen projection) 1. Establish a wireless LAN connection between the projector and the first computer, and then click the button. • This will cause the display contents of the first computer to appear in the upper left corner of the 4-screen projection. The button will change to to indicate the projection is in progress in the upper left corner of the screen. 2. Establish a wireless LAN connection between the projector and the second computer, and then click the button. • This will cause the display contents of the second computer to appear in the upper right corner of the 4-screen projection. 3. Establish wireless LAN connections with the third and fourth computers and then click the and buttons. • The display contents of the third computer will appear in the lower left corner, and the display contents of the fourth computer will appear in the lower right corner of the 4-screen projection. Note • Simultaneous wireless LAN connections are supported for up to 32 computers and a single projector. Simultaneous projection of screen images is supported for up to four computers connected via wireless LAN. • While 4-screen projection is being performed, clicking the , , or button on a computer that is connected to the projector via wireless LAN will start projection from that computer to the 4-screen projection. The location of the computer’s projection image depends on the button that is clicked. If there already is another computer projecting in the location that corresponds to the button that is pressed, the current projection is cancelled. However the wireless LAN connection is maintained between the computer whose projection was cancelled and the projector. • Clicking the button during 4-screen projection on a computer that is connected to the projector via wireless LAN will switch to 1-screen projection from that computer. At this time the wireless LAN connections are maintained between the projector and the computers whose projections are cancelled. Pausing and Stopping Projection from a Computer during 4-screen Projection • Clicking the button on any of the computers that are projecting during 4-screen projection pauses the projection image from that computer only. The projection images from the other computers are not affected. • Clicking the button on any of the computers that are projecting during 4-screen projection stops projection image from that computer only. The projection images from the other computers are maintained. • When there is only one computer projecting to a 4-screen projection, clicking the button will stop 4-screen projection and display the Wireless standby screen. 27 Display...

Herunterladen

Geben Sie zwei Ziffern: