Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N. AV SYSTEM Menu icon This box indicates system being selected. Move the pointer (red arrow) to system and press the OK button. Y, Pb/Cb, Pr/Cr JACKS Auto The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance. When the Video System is 1035i or 1080i, select the system manually. COMPONENT VIDEO SIGNAL FORMAT If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i, 575i, 480p, 575p, 720p, 1035i, and 1080i. AV SYSTEM MENU (COMPONENT VIDEO) AV SYSTEM Menu icon This box indicates system being selected. Move the pointer (red arrow) to system and press the OK button. VIDEO INPUT PICTURE IMAGE SELECT IMAGE LEVEL SELECT DIRECT OPERATION IMAGE button Select an image level from among Standard, Cinema, Custom by pressing the IMAGE button on the top control or on the remote control unit. Standard Cinema Custom 1 Standard Normal picture level preset on this projector. Picture level adjusted for picture with fine tone. Cinema Custom 10 Custom 1–10 User preset picture adjustment in the IMAGE ADJUST Menu. (pp.35–37) MENU OPERATION Press the MENU button to display the On-Screen 1 IMAGE SELECT MENU Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the IMAGE SELECT Menu icon. Press the POINT UP/DOWN buttons to move the red 2 frame pointer to the desired level and then press the OK button. Standard Normal picture level preset on this projector. Move the red frame pointer to a level and press the OK button. IMAGE SELECT Menu icon Cinema Picture level adjusted for picture with fine tone. Custom 1–10 User preset picture adjustment in the IMAGE ADJUST Menu. (pp.35–37) VIDEO INPUT PICTURE SCREEN ADJUSTMENT PICTURE SCREEN SELECT This projector has a picture screen resize function, which enables you to customize the image size. Press the MENU button to display the On-Screen 1 SCREEN MENU Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the SCREEN Menu icon. Press the POINT DOWN button and move the red 2 frame pointer to the desired function and then press the OK button. and press the OK button. Move the red frame pointer to a function SCREEN Menu icon Normal Provides image at the normal video aspect ratio of 4:3. NOTE: Wide • SCREEN Menu can not be operated when “720p,” “1035i,” or “1080i” is selected in the AV SYSTEM Menu (p.32). Provides image at the wide screen ratio of 16:9. PICTURE IMAGE PICTURE IMAGE ADJUSTMENTS Press the MENU button to display the On-Screen 1 Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the IMAGE ADJUST Menu icon. Press the POINT UP/DOWN buttons to move the red 2 frame pointer to the desired item and then press the OK button. The level of each item is displayed. Adjust each level by pressing POINT LEFT/RIGHT buttons. Contrast Press the POINT LEFT button to decrease contrast; press the POINT RIGHT button to increase the contrast (from 0 to 63). Brightness Press the POINT LEFT button to decrease the brightness; press the POINT RIGHT button to increase the brightness (from 0 to 63). Color Press the POINT LEFT button decrease the intensity of the color; press the POINT RIGHT button to increase the intensity of the color (from 0 to 63). Tint Press the POINT LEFT/RIGHT buttons to adjust the tint value to obtain proper color balance (from 0 to 63). Color Management The Color management function can be used to adjust the LEVEL, PHASE, and GAMMA of the selected display colors (except for black, white, and gray) on the screen and replace these colors with other colors if required. You can store up to eight (8) color management data. 1 1 Press the POINT UP/DOWN buttons to move the red frame pointer to Color management, and then press the OK button. The image being projected freezes, and the COLOR MANAGEMENT POINTER appears. 2 2 Use the POINT UP/DOWN/LEFT/RIGHT buttons to move the pointer to a spot where you want to adjust the color and then press the OK button. The COLOR SELECTION window appears, and the color in the center of the pointer is selected and you can adjust the color. 3 3 Use the POINT UP/DOWN/LEFT/RIGHT buttons to adjust the LEVEL and PHASE of the color, and then press the OK button to confirm the setting. Then use the POINT UP/DOWN buttons to adjust the GAMMA for the color and press the OK button to accept the setting. After adjusting, press the OK button to go to the COLOR MANAGEMENT LIST. COLOR SELECTION MODE IMAGE ADJUST MENU Move the red frame pointer to item to be selected and then press OK button. IMAGE ADJUST Menu icon Press the POINT LEFT/RIGHT buttons to adjust the value. POINTER MODE COLOR MANAGEMENT POINTER NOTE: Press the COLOR M. button on the remote control unit to display the COLOR MANAGEMENT POINTER. If you...