Anleitung Samsung, modell SP-M250
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
• - □ is only be supported for the [AV], 480i, and 576i of AV Timing (D-Sub) signals. PC For PC signals, the four PC functions eliminate or reduce noise that causes unstable screen quality, such as screen shaking. If the noise is not removed using Fine Adjustment, adjust the frequency to the maximum and then perform Fine Adjustment again. E3 These functions are only enabled for the PC Timing (D-Sub/HDMI) input of the D-Sub terminal. 1 0 Refer to PC Timing (D-Sub/HDMI). • : Used to adjust the frequency and phase of PC screen automatically. • : Used to adjust the frequency when vertical lines appear on the PC screen. • : Used to fine tune the PC screen. • : Using this function, you can reset the PC menu settings to the factory default settings. Zoom You can magnify the screen to a size you want. • - - - □ This function is only enabled when the input signal is a PC Timing (D-Sub/HDMI) signal. Using 3-5 H 3-5-3. Setup SetuD - istall : Front-Floor ► Lamp Mode ta ► t* Auto Keystone 0“ ► V-Keystone = 1 _1 0 0 Background Test Pattern 1 oca ► ► Video Type Ai.to ► Caption Reset ► i Move E1 Enter 0 Return MENU DESCRIPTION Install To tailor the picture to the installation location, (for example, behind a semi-transparent screen, hanging from the ceiling), you can invert the projected images vertically / horizontally. • : Normal Image • : Horizontal/Vertical Reversed Image • : Horizontally Reversed Image • : Vertically Reversed Image Lamp Mode Using this function, you can set the image brightness by adjusting the amount of light generated by the lamp. • : This mode is optimized for screens smaller than 100 inches. This mode decreases the lamp brightness and power consumption in order to extend the lamp lifetime and reduce noise and power consumption. • : This mode maximizes the lamp brightness when the ambient illumination is bright. As the brightness of the lamp increases, the lamp lifetime can be reduced and the noise and power consumption may increase. Auto Keystone If video scenes are distorted or tilted, you can compensate for this by setting the function to so that the function automatically starts. • - V-Keystone If video scenes are distorted or tilted, you can compensate for this using the vertical Keystone function. □ The sound output of your projector is temporarily stopped while the keystone is being changed. E3 Keystone does not compensate for distorition in the On Screen Display (OSD) menu. Background You can select an image or screen which will appear when there is no signal from the external device connected to the projector. • -- Test Pattern A default test pattern built into the projector. You can use it as a reference picture to optimize the installation of the projector and to optimize images. • : You can check whether the picture is distorted or not. • : You can reference and display picture format sizes such as 1.33 : 1 or 1.78 : 1. 3-5 Using MENU DESCRIPTION Video Type If the screen quality is abnormal as a result of the projector not identifying the input signal type auto- matically in or mode, Video Type lets you manually set the input signal. • In mode, the menu is only enabled for AV Timing (D-Sub) input signals. For separate H/V sync, it is only enabled for a 1280 x 720p 59.94Hz/60Hz signal. • --- • In mode,
Dieses Handbuch ist für folgende Modelle:
Projektoren - SP-M200 (1.69 mb)
Projektoren - SP-M220 (1.69 mb)
)
