Stimmen - 3, Durchschnittliche Bewertung: 3 ( )

Hersteller: Samsung Dateigröße: 1.31 mb Dateiname: Unterrichtssprache:

Dieses Gerät hat auch andere Anweisungen:

Projektoren - SP-A900B (1.41 mb)

Projektoren - SP-A900B (1.46 mb)

Place the projector so that the lens is at the center of the screen. If the screen is not vertically installed, the picture on the screen may not be a rectangle. Do not install the screen in bright surroundings. If the screen is too bright, the picture on the screen will not be displayed clearly. When installing the screen in bright surroundings, use curtains. You can install the projector in the following locations: Front-Floor / Front-Ceiling / Rear-Floor / Rear-Ceiling. (To view the installation position settings) To view the picture when installing the projector behind the screen, Install a semi-transparent screen. Select Menu > Setup > Install > Rear-Floor To view the picture when installing the projector in the front of the screen, Install the projector at the side where you are watching the screen. Select Menu > Setup > Install > Front-Floor Zoom and Focus Adjustment Zoom Knob Focus Ring You can adjust the size of image within zoom range by manipulating the Zoom Knob. Focus the picture on the screen using the Focus Ring. If your product is installed at a location out of the specified projection distance (refer to Screen Size and Projection Distance), the focus cannot be adjusted correctly. Leveling with Adjustable Feet For level placing of the projector, adjust the Adjustable Feet of the projector. You may adjust the level of the projector up to 3 degrees. Depending on the position of the projector, Keystone distortion of image may appear. Adjusting the Lens Position Moving Dial Move the picture projected on the screen up and down within the lens range by turning the Lens Shift Dial on the top side of the projector with your fingers. Screen Size and Projection Distance Install the projector on a flat, even surface and level the projector using the adjustable feet to realize optimal picture quality. If images are not clear, adjust them using the Zoom Knob or Focus Ring, or move the projector forward and backward. Screen size Horizental Vertical(Y:mm) Min(Z:mm) Max(Z:mm) Offset (Y':mm) (M:inch) (X:mm) 40 886 498 1983.6 1523.1 50 50 1107 623 2479.5 1903.9 62 60 1328 747 2975.3 2284.6 75 70 1550 872 3471.2 2665.4 87 80 1771 996 3967.1 3046.2 100 90 1992 1121 4463 3427 112 100 2214 1245 4958.9 3807.7 125 110 2435 1370 5454.8 4188.5 137 120 2657 1494 5950.7 4569.3 149 130 2878 1619 6446.6 4950.1 162 140 3099 1743 6942.5 5330.8 174 150 3321 1868 7438.4 5711.6 187 160 3542 1992 7934.3 6092.4 199 170 3763 2117 8430.2 6473.2 212 180 3985 2241 8926 6853.9 224 190 4206 2366 9421.9 7234.7 237 200 4428 2491 9917.8 7615.5 249 210 4649 2615 10413.7 7996.3 262 220 4870 2740 10909.6 8377 274 230 5092 2864 11405.5 8757.8 286 240 5313 2989 11901.4 9138.6 299 250 5535 3113 12397.3 9519.3 311 300 6641 3736 14876.7 11423.2 374 This projector is designed to show images optimally on a 100 ~ 120 inch sized screen. A. Screen Z: Throw DistanceY': Distance from Lens Center to Image Bottom Setting up the PC Environment -Check the following items before connecting your PC to your projector. 1. Click the right mouse button on the Windows desktop and click on [Properties]. tab will appear. 2. Click on [Settings] tab and set the by referring to described in the display mode table supported by this projector. You do not have to change setup. 3. Press the [Advanced] button. Another property window will appear. 4. Click on [Monitor] tab and set the by referring to described in the Supported Resolution/Size Modes table. Set up both the vertical and horizontal frequency instead of . 5. Click the [OK] button to close the window, and click the [OK] button of the window to close the window. The computer may restart automatically. 6. Shut down the PC and connect to the projector. Process might vary depending on the type of computers or Windows versions. (For example, [Properties] appears instead of [Properties (R)] as shown in 1.) This appliance supports up to 32 bits per pixel in Color quality when it is used as a PC monitor. Projected images may differ from the monitor depending on monitor manufacture or Windows versions. When connecting the projector to a PC, check that PC setup complies to display settings supported by this projector. If not, there may be signal problems. | Basic Settings | Connecting the Power | Connecting to video equipment | 1. Rear of Projector Plug the power cord into the power terminal on the rear side of the projector. When used outside of the U.S., HAR cord with fittings of an approved agency may be used. | Basic Settings | Connecting the Power | Connecting to video equipment | Connecting a DVD player/Cable/Satellite Box to HDMI/DVI -Connecting using a HDMI/DVI cable Connect the [HDMI 1/DVI IN] terminal on the back of the projector and the DVI output terminal of the DVD player/Cable/Satellite box using a HDMI/DVI cable. -Connecting using a HDMI cable Connect the...

Herunterladen

Geben Sie zwei Ziffern: