Stimmen - 2, Durchschnittliche Bewertung: 5 ( )

Hersteller: Panasonic Dateigröße: 1.91 mb Dateiname: PTL556U.PDF Unterrichtssprache:

(See pages 3, 4.) • All connections are made. (See pages 12,13.) • LCD Projector is positioned properly. (See page 10.) LCD Projector is plugged in. Lens cap is removed. FREEZE—'! Button MUTE Button SHUTTER Button VOLUME +/-Buttons INPUT Button 1 2 Turn on the Power. (See “Turning the power on and off” on page 9.) Press INPUT on the LCD Projector or remote control to select the desired input signal. •Continue to press INPUT to set the desired input signal. Each press will change the display as shown below. с RGB -> PC-CARD -> S-VIDEO or VIDEO • If unit is connected with both S-VIDEO and VIDEO cables, the S-VIDEO signal has priority. •You may turn the input signal display off. (See “Turning off the input signal display" on page 20.) Turn on your computer (RGB) or start video playback (S-Video or Video). •Adjust FOCUS and ZOOM Rings if necessary. (See “Adjusting the lens” on page 11.) Press VOLUME +/- on the LCD Projector or remote control to adjust the volume level of the built-in speaker. •The number of segments (0 - 63) increases or decreases as the volume is adjusted. [When you select S-VIDEO or VIDEO Input signal.] input signal input signal format Note: • When S-VIDEO or VIDEO input signal is selected, the name of the signal format will be displayed directly below the input signal in the on screen display. Special effects while projecting •Turning off the sound Press the MUTE Button to instantly mute the sound. Press again to restore the previous sound level. • Manual Shutter Function Press the SHUTTER Button to blank out the video and mute the sound. Press again to return to the normal screen and sound. • Freeze the picture Press the FREEZE Button to freeze the picture and mute the sound. Press again to return to the normal screen. - 19- Using other useful functions You may use buttons on the LCD Projector or remote control for the following operations. ■ Selecting the Video System Format The LCD Projector is equipped with full NTSC, PAL, SECAM, PAL-M, PAL-N, and NTSC4.43 video support. Usually set to AUTO, the broadcast format is automatically switched according to the tape inserted. If you experience poor color however, you may have to set to NTSC, PAL, SECAM, PAL-M, PAL-N, and NTSC4.43 as described below. S-Video/ Video input is selected (page 19). 1 Press MENU to display the menu. 2 Press A or V to select VIDEO SYSTEM, and then < or > to display the screen. 3 Press A or V to select the desired video system. 4 Press MENU twice to exit. MENU......... VIDEO ADJUST SET UP PROJECTOR »VIDEO SYSTEM LANGUAGE /SPRACHE /LANGUE /IDIOMA /LINGUA SELECT SET END PUSH AorT PUSH 4or> PUSH MENU HJIIIII PAL SECAM NTSC PAL-M PAL-N NTSC4.43 SELECT END : PUSH A or Y : PUSH MENU ■ Selecting the Language for On-Screen Displays The LCD Projector can display screens in one of five different languages. The procedure and on-screen displays shown below are based on RGB as the input signal. 1 Press MENU to display the menu. 2 Press A or V to select LANGUAGE, and then < or > to display the screen. 3 Press A or V to select the language. 4 Press MENU twice to exit. ■ Turning off the input signal display The function which displays the currently selected input signal on the screen can be turned off by the following procedure. The procedure and on-screen displays shown below are based on RGB as the input signal. 1 Press MENU to display the menu. 2 Press A or V to select SET UP PROJECTOR, and then < or > to display the screen. 3 Press A or V to select INPUT DISP, and then < or > to select ON or OFF. • Select OFF to turn off the input signal display function. • Select ON to turn the input signal display function. The input signal will be displayed each time it is changed. (This is the factory setting.) 4 Press MENU twice to exit. MENU....... RGB ADJUST RGB SYNC MENU SET UP PROJECTOR ■MIMBMJ /SPRACHE /LANGUE /IDIOMA /LINGUA SELECT SET END PUSH AorT PUSH 4 or ► PUSH MENU nrnsnasm DEUTSCH FRANÇAIS ESPAÑOL I TAL I ANO SELECT END PUSH AOfT PUSH MENU ......... MENU ......... RGB ADJUST RGB SYNC MENU LANGUAGE /SPRACHE /IDIOMA /LANGUE /LINGUA SELECT SET END PUSH A or Y PUSH 4 or ► PUSH MENU SET UP PROJECTOR FRONT/REAR REMOTE POWER EXPANS ION (VGA' SELECT SET END & PUSH AorT PUSH 4 or ► PUSH MENU ON ON NO ■ Disabling the POWER button on the remote control In order to prevent the power being turned off by mistake, the POWER button on the remote control can be disabled by the following procedure. The procedure and on-screen displays shown below are based on RGB as the input signal. 1 Press MENU to display the menu. 2 Press A or V to select SET UP PROJECTOR, and then < or > to display the screen. 3 Press A or V to select REMOTE POWER, and then < or > to select ON or OFF. • Select OFF to disable the POWER button on the remote control. • Select ON to use the POWER button on the remote contro...

Herunterladen

Geben Sie zwei Ziffern: