Stimmen - , Durchschnittliche Bewertung:
(
)
)
Hersteller: BOXLIGHT
Dateigröße: 1.08 mb
Dateiname: aa716827-608f-4980-8612-eaec88da6609.pdf
Unterrichtssprache:
Das Dokument wird geladen, bitte warten
 |
Das Dokument wird geladen, bitte warten
Anleitung Zusammenfassung
16.4’ (5 m) 60° 16.4’ (5 m) Used to adjust zoom. (P20) ON-OFF FOCUS D.ZOOM ZOOM MENU SCREEN MUTE 11 2 2 3 3 4 Z F Z F D D KEYSTONE KEYS FREEZE AUTO PC ADJ. AUTO COLOR.M NO SHOW IMAGE INPUT INPUT LENS SHIFT LENS VOLUME VOLUME SELECT ZOOM BUTTON Used to adjust focus. (P20)NO SHOW BUTTON Used to turn picture into black image. (P21) Used to select DIGITAL ZOOM +/– mode and resize image. (P30) KEYSTONE BUTTON Used to correct keystone distortion. (P20, 37) Used to select image level. (P27, 33) 60° WIRED REMOTE JACK When using as Wired Remote Control, connect Remote Control Cable to this jack. Battery installation is required when using as Wired Remote Control. SCREEN BUTTON Used to select screen. (P30, 36) COLOR MANAGEMENT BUTTON Used to operate COLOR MANAGEMENT. (P28, 34) To insure safe operation, please observe following precautions : Use (2) AA, UM3 or R06 type alkaline batteries. Replace two batteries at same time. Do not use a new battery with an used battery. Avoid contact with water or liquid. Do not expose Remote Control Unit to moisture, or heat. Do not drop Remote Control Unit. If a battery has leaked on Remote Control Unit, carefully wipe case clean and install new batteries. Danger of explosion if battery is incorrectly replaced. Dispose of used batteries according to batteries manufacturers instructions and local rules. BEFORE OPERATION TOP CONTROLS AND INDICATORS Used to open or close MENU operation. (P17, 18) MENU BUTTON IMAGE BUTTON READY INDICATOR SELECT BUTTON POWER ON–OFF BUTTON INPUT BUTTON WARNING TEMP. INDICATOR LAMP INDICATOR POINT (VOLUME + / – ) BUTTONS LAMP REPLACE INDICATOR Used to select image level. (P27, 33) Lights green when the projector is ready to be turned on. And it flashes green in Power Management mode. (P37) Becomes dim when the projector is turned on. And bright when the projector is in stand-by mode. Turns to yellow when life of projection lamp draws to an end. (P40) Flashes red when internal projector temperature is too high. (P39) Used to select input source. (P22) Used to execute item Used to turn the projector on or off. (P19) Used to adjust zoom. (P20) FOCUS BUTTON Used to adjust focus. (P20) ZOOM BUTTON This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top. LENS SHIFT BUTTON Used to select LENS SHIFT function. (P20) AUTO PC ADJ. BUTTON Used to operate AUTO PC Adjustment function. (P23) Used to select an item or adjust value in ON-SCREEN MENU. They are also used to pan image in DIGITAL ZOOM +/– mode. (P30) POINT LEFT/RIGHT buttons are also used as VOLUME +/– buttons. selected. It is also used to expand / compress image in DIGITAL ZOOM mode. (P30) HOW TO OPERATE ON-SCREEN MENU OPERATING ON-SCREEN MENU BEFORE OPERATION HOW TO OPERATE ON-SCREEN MENU OPERATING ON-SCREEN MENU BEFORE OPERATION TOP CONTROL Center of point button used to select item. SELECT BUTTON Used to move Pointer UP/ DOWN/ RIGHT/ LEFT. POINT BUTTON WIRELESS REMOTE CONTROL POINT BUTTONS Used to move Pointer UP/ DOWN/ RIGHT/ LEFT. SELECT BUTTON Used to select item. You can control and adjust this projector through ON-SCREEN MENU. Refer to following pages to operate each adjustment on ON-SCREEN MENU. 2 MOVING POINTER 1 DISPLAY MENU Press MENU button to display ON-SCREEN MENU. Move pointer (. see below) or adjust value of item by pressing POINT button(s) on Top Control or on Remote Control Unit. . Pointer is icon on ON-SCREEN MENU to select item. See figures on section "FLOW OF ON-SCREEN MENU OPERATION" below. 3 SELECT ITEM Select item or set selected function by pressing SELECT button. FLOW OF ON-SCREEN MENU OPERATION Display ON-SCREEN MENU Press MENU button to display ON-SCREEN MENU (MENU BAR). A red frame is POINTER. 1 2 Select Menu to be adjusted Move POINTER (red frame) to MENU ICON that you want to select by pressing POINT RIGHT / LEFT buttons. Control or adjust item through ON-SCREEN MENU 3 3 Press POINT DOWN button and move POINTER (red frame or red arrow) to ITEM that you want to adjust, and then press SELECT button to show ITEM DATA. 4 4 Adjust ITEM DATA by pressing POINT RIGHT / LEFT buttons. Refer to following pages for details of respective adjustments. MENU ICON MENU BAR POINTER (red frame) ITEM DATA Press POINT LEFT/RIGHT buttons to adjust value or set function. SELECT BUTTON POINTER (red frame) Press POINT DOWN button to move POINTER. ITEM 32 32 32 32 32 Mid 17 BEFORE OPERATION MENU BAR Used to select computer system. (Refer to P22, 23) IMAGE ADJUST MENU Used to adjust computer image. [Contrast / Brightness / Color temp. / White Balance (R/G/B) / Color management / Auto picture control / Gamma] (Refer to P28-29) SETTING MENU Used to change settings of projector or reset Lamp Replace Counter. (Refer to P37, 38) SOUND MENU Used to adjust volume or mute sound. (Refer to P21) IMAGE SELECT MENU Used to select image level among Standard, Real and Image 1 ~ 4. (Refer to P27) FOR PC SOURCE Press MENU BUTTON while connecting to PC input source. AV SYSTEM MENU Used to sel...