Stimmen - 4, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: AB Soft Dateigröße: 1.59 mb Dateiname: Unterrichtssprache:

Select a sharpness setting. Color: adjusts a video image from black and white to fully saturated color. The color setting applies to video sources only. Tint: adjusts the red-green color balance in the image of NTSC video images. The tint setting applies to NTSC video sources only. Aspect Ratio: Aspect ratio is the ratio of the image width to image height. TV screens are usually 4:3. HDTV and most DVDs are 16:9. The default is 4:3. Select Auto to have the projector choose the ratio. Choose Native to see the unmodified input with no resizing by the projector. Select 16:9 to watch enhanced widescreen DVDs. For more information regarding Aspect Ratio, see page 12. Apply Preset...: Presets are provided that optimize the projector for displaying computer presentations and video images under certain conditions. There are also user-definable presets. To set a preset, adjust the image, select Save User in the Presets menu. You can recall these settings in the future by selecting the User preset. Keystone: adjusts the image vertically and makes a squarer image. You can also adjust keystone from the keypad. 2 50 50 Maximum 50 50 Auto Basic Picture menu increasing keystone decreasing keystone Advanced Picture menu BrilliantColor™: produces an expanded on-screen color spectrum that delivers enhanced color saturation for bright, true-to-life images. Choose Normal Look for most video sources and Bright Look for most computer sources. White Peaking: (video sources only) increases the brightness of whites that are near 100%. Color Temperature: changes the intensity of the colors. Select a listed relative warmth value. Overscan: removes noise around the video image. Phase: adjusts the horizontal phase of a computer source. Sync Threshold: (progressive signals only) If a hardware device, such as a DVD player, is not syncing properly with the projector, select this option to help it to sync when connected to the projector. Tracking: adjusts the vertical scan of a computer source. Color Space: This option applies to computer and component video sources. It allows you to select a color space that has been specifically tuned for the input signal. When Auto is selected, the projector automatically determines the standard. To choose a different setting, turn off Auto, then choose RGB for computer sources, choose either REC709 or REC601 for component video sources. Gamma: select the appropriate gamma from among Video, Film, Bright, and CRT. Horizontal/Vertical Position: adjusts the position of a computer source. 2 Advanced Picture BrilliantColor™ Normal Look White Peaking 50 Color Temp Warmest Overscan Off Phase 50 Sync Threshold ▼ 50 Advanced Picture menu 9 Setup menu Language: allows you to select a language for the onscreen display. Custom Key: allows you to assign a different function to the Custom button, allowing you to quickly and easily use the effect. Highlight an effect and press Select to choose a different one. • Blank Screen: displays an empty screen. • Mute: turns off all sound. • Aspect Ratio: toggles among 4:3,16:9, and Native (see page 12 and page 28). • Source: cycles through available sources. • Auto Image: resets the projector to the source (page 24). • Freeze Screen: pauses the projected image. • Source Info: the default effect. It opens a window with projector and source information. • Projector Info: opens a window with projector information. • Overscan: removes noise around the image. • Closed Captions: cycles through caption options. AC Power On: When this feature is on, the projector automatically turns on when electrical power is connected. This allows control of ceiling mounted projectors with a wall power switch. Auto Off Time: automatically turns the projector off after no signals are detected for a preset number of minutes. If an active signal is received before the projector powers down, the image will be displayed. Screen Save Time: automatically blanks the screen with a black color after no signals are detected for a preset number of minutes. The image returns when an active source is detected or a remote or keypad button is pressed. Lamp Low Power: toggles between on and off. Turn it on to lower the light output of the lamp. This also lowers the fan speed, making the projector quieter. Power Sounds: Controls whether the projector makes a sound when powered on and off. Auto Source: When this feature is On, the projector automatically finds the active source, checking the selected Power-up Source first. When this feature is Off, the projector defaults to the source selected in Power-up Source. To display another source, you must manually select one by pressing the Source button on the remote or keypad. (§) Setup © A Language English Custom Key Source Info AC Power On orr © Auto Off Time Never Screen Save Time Never © Lamp Low Power off Setup menu Power-up Source: determines which source the projector checks first for act...

Herunterladen

Geben Sie zwei Ziffern: