Stimmen - 4, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: Panasonic Dateigröße: 1.87 mb Dateiname: d2b22b57-6bf9-4249-80dc-b2a9d3b33a8d.pdf Unterrichtssprache:

USB Cable(Sold Separately) To USB PortFlatbedScannerMFPTo USB Port About the Usage Location • Do not place the elite Panaboard where it is directly exposed to sunlight, near a stove, near to a heating/ cooling vent or exposed to strong winds. • Do not use the elite Panaboard in a location less than 10 °C (50 °F) or in a location subject to extreme changes in temperature. Note • The elite Panaboard may not work properly when used in one of the above locations. Operating Instructions (For Basic Operations) Usage Usage • The volume of the USB speaker on the elite Panaboard can be controlled using the Volume Dial, the volume of Windows, and the volume of the application being used. To adjust the volume, use the Volume Dial, or adjust the volume of the application. Power Switch • After turning the elite Panaboard off, wait more than 2 seconds before turning it back on. Moving the elite Panaboard When Using the Stand (Sold Separately) 1. Make sure that the power switch is set to "O" (OFF), and disconnect the power cord and USB cable. 2. Release the locks on the casters. 3. Move the elite Panaboard, avoid banging or shaking the board. Notice • Always move the elite Panaboard with 2 people. • Do not drag or step on the cable. 4. Lock the casters. 1 Operating Instructions (For Basic Operations) 21 Usage Usage You need to install the elite Panaboard software on the computer that will be used with the elite Panaboard. To install the elite Panaboard software, follow the procedure below. Notice • Do not connect the USB cable until the installation is completed. • Do not connect more than 1 elite Panaboard to the same computer. (Doing so can cause erroneous behavior on the computer.) 1. Turn on your computer and start the Windowsoperating system. • Log into an account with Administrator privileges. 2. Insert the included CD-ROM into the CD-ROM drive. • The setup screen will be displayed. • If the setup screen does not appear, select your CD-ROM drive in Explorer and double-click [Menu.exe]. • In Windows Vista, if the Autoplay dialog box is displayed, click [Run Menu.exe]. 3. When the "Welcome" screen has been displayed, click [Next]. 4. Click [Install elite Panaboard]. 5.If you agree to the terms in the "LicenseAgreement", click [Yes]. •In Windows Vista, if the "User Account Control" window is displayed, click [Continue] to continue with the installation. 6. When the following screen is displayed, confirmthat the USB cable is not connected to yourcomputer or the elite Panaboard, and click [OK]. • If the USB cable is connected to the elite Panaboard, disconnect the cable, and click [OK]. • If .NET Framework 2.0 or later is not installed, an installation screen will be displayed. Follow the on-screen directions to install these components. 7. When the installation wizard is displayed, followthe on-screen instructions and continue with the installation. 8. When installation has finished, click [Finish]. • Restart...

Herunterladen

Geben Sie zwei Ziffern: