Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
• No tools required for installation. • Viewing surface is washable. • Frame tears down quickly for storage. • Can be mounted permantly to the wall, or used as a portable screen with optional leg kit. • Ideal projection screen for home, office or for making presentations. FABRIC CLEANING AND CARE The screen fabric can be dry cleaned or machine washed in cold water with mild detergent. Tumble dry on low heat. CAUTION: Keep away from high temperature Fabric Construction: 100% Polyester Added Treatments: Environmental Protection, Anti- Microbial, Flame Retardant ( Meets NFPA 701 Fixed Screen Wall Mount Configuration 1 standards) 2 • Find a clean surface to work on. • Place frame pieces face down on the clean work surface (so the extrusions are facing up). • Connect frame pieces together. Hand tighten the screws. • Remove viewing surface from protective pouch and spread out over the frame so that the vinyl strip is facing down. • Attach the corners of the viewing surface to the corners of the frame using the velcro straps. • Finish attaching viewing surface to frame by inserting the vinyl strips along all four sides into the fabric retainer extrusions on the frame. Velcro Strap Fabric Vinyl Strip PORTABLE MOUNTING USING OPTIONAL LEG KIT • Extend the center support to the correct height and place it in the center of the screen frame. This will provide additional tension to the center of the frame and prevent sagging. • Mount the legs to the back of the screen frame using pre-mounted attachment brackets. • Place plastic octagonal feet on the floor, and insert aluminum legs into plastic octagonal feet. B ASSEMBLY Velcro Strap SUGGESTED METHODS OF INST ALLA TION WALL MOUNTING • Attach four mounting brackets to the wall— two each at the top and bottom. Make sure the two top brackets are mounted level. Eight # 8 x 1" long Phillips Pan Head screws & eight plastic mollies as used in dry wall are provided. However, certain installations may require fastener hardware that is not supplied. • Use chart below to determine bracket spacing, and how far down to locate the two bottom brackets. • Mount the screen to the wall brackets ( see detail C) by hanging the screen from the top brackets, then pulling down slightly on the bottom of the screen frame, allowing the frame to snap up onto the bottom brackets. WALL BRACKET SPACING H W Make sure brackets on bottom are installed upside down, as shown. Screen Size Height Width 82" HDTV 411/ 8 " 32" 92" HDTV 46" 32" 106" HDTV 53" 42" 84" NTSC 513/ 8 " 32" 100" NTSC 61" 32" END USER PRODUCT LIMITED WARRANTY AND RETURN POLICY LIMITED WARRANTY AccuScreens warrants ( this " Limited Warranty" ) to the original end user customer ( the " End User" ) that this product is free from defects in material and workmanship ( except as provided below) for twelve ( 12) months from the date of manufacture or one ( 1) year from the date of purchase, whichever period ends first ( the " Warranty Period" ) . This Limited Warranty extends only to the End User, and is not transferable. This Limited Warranty is applicable to products that are repaired or replaced for the balance of the Warranty Period or for ninety (90) days from the date the product is repaired or replaced, whichever is longer. If a product breaches this Limited Warranty, the End User may return it to AccuScreens in accordance with the terms of the Return Policy, below, within a reasonable time after the End User discovers the defect. Subject to the conditions and limitations set forth below ( the " Excluded Items" ), AccuScreens will, at its discretion, either repair or replace any part of the product that proves defective by reason of improper workmanship or materials. If the End User returns a product to AccuScreens and AccuScreens determines that this Limited Warranty does not apply, AccuScreens will not return the product to the End User unless the End User requests it to do so and pays all expenses 3 of shipment. If End User does not request and pay for AccuScreens to return the product, it will become AccuScreens' property. Any product covered by this Limited Warranty ( as determined by AccuScreens) will, after repair or replacement, be shipped back to the End User at AccuScreens' expense. AccuScreens’ total liability under this or any other warranty, express or implied, is limited to repair, replacement or refund. Repair, replacement or refund are the sole and exclusive remedies or breach of warranty or any other legal theory. In no event shall AccuScreens be liable for any incidental, indirect or consequential damages, whether resulting from the purchase, use, misuse, inability to use or inability to install the product or from defects in the product. Some states do not allow the exclusion or limitation of incidental and consequential damages, so the above limitation or exclusion may not apply. This limited warranty is the exclusive warranty given by AccuScreens for the product and is in lieu of all other warranties. AccuScreens di...