Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
Charge the rechargeable batteries with a commercially available charger. (The AC Adapter enclosed in the package cannot be used as a battery charger. ) Wash Medication Bottle, Mesh Cap, and Vibrator with clean tap water or commercially available distilled water. Wash Medication Bottle, Mesh Cap, and Vibrator with clean tap water or the commercially available distilled water. When rinsing Medication bottle under the tap, use gentle pressure, not strong running tap Assemble the cleaned and disinfected parts after sufficiently drying them. Do not use benzene, thinner, or gasoline to clean the unit. Do not dry Main Unit, AC Adapter, Medication Bottle, and Mesh Cap in a microwave oven or boil them to clean.. Do not store the unit under high temperature and high humidity, or under direct sunshine. Do not leave or carry the Medication Bottle Unit filled with medication or water. Remove batteries from the unit when you are not going to use the unit for a long period (approximately three months or more). Features 1 1 Pocket-sized unit carried anywhere you go The unit is small enough easily carry it around wherever you go. The new titanium alloy mesh creates a high efficiency aerosol. 2 2 Inhalation is possible at various angles The new bottle structure enables inhalation at various angles with stable nebulization. Therefore, the unit can be used even at bedside. 3 3 Simple care and easy use The unit does not need any complex care. Just like the traditional compressor type nebulizer, all you have to do is to remove the medication after inhalation and dry the bottle immediately after washing it. To start inhalation, you must assemble the unit. Before starting to use the unit, please read the section on “How to Assemble the Main Unit” and understand the points for assembling. (Refer to Pages 8 and 9) Before Using the Unit Features of the Product 4 5 Before Using the Unit Names and Functions of the Parts Names and Functions of the Parts 7 Components of the Product Please check the product. 6 Before Using the Unit Components of the Product Main Unit Cover Stores the main unit. Main Unit Cover Power Button Turns Main Unit on and off. Mesh Cap An alloy mesh is installed for nebulization. – Handle mesh with care because it is very delicate. Medication Bottle Cap Locking Lever Opens the Medication Bottle Cap for washing. – Do not open Medication Bottle Cap except for washing. Medication Bottle A container to store the medication The following items are contained in the box. If any item is missing, contact the store where you purchased the product or the nearest OMRON dealer. Main Unit Medication Bottle Mesh Cap (with Mesh) Instruction Manual Instructional Video Storage Case Power Plug Main Unit Locking Board AC Adapter as Standard Supply Cord Band AC Adapter Connection Stand Battery Low Indicator Orange light blinks when the batteries are worn. Electrode Supplies the power from the Main Unit to the Vibrator of Medication Bottle. Medication Port Fill the medication by opening the Mesh Cap. Bottom of Main Unit Power Indicator A green lamp turns on when the power is on. Battery Cover Disengaging Lever AC adapter Jack on Main Unit Mask Adapter ® Mouthpiece Child’s Mask (Optional) 9921 AC Adapter (Optional) How to Assemble the Main Unit 9 Before Using the Unit How to Assemble the Main Unit How to Assemble the Main Unit 8 Before Using the Unit How to Assemble the Main Unit This unit must be assembled before it is used. – Parts may fit tightly since they are made to prevent the medication from leaking. – You must wash and disinfect all removable parts before using the unit. Assemble the unit after washing, disinfecting, and drying. (For how to disinfect the unit, refer to Page 18) 2 Attach the Medication Bottle to the Main Unit. 3 Attach the Mask Adapter to the Main Unit. – If you are not going to use the unit soon after it is assembled, disassemble the unit (as shown in the Figure to the right) and store in the supplied Storage Case or store it in clean environment. (For the correct use of the unit, refer to Page 15) Insert the Mesh Cap vertically. Align both electrodes with each other. Do not open the bottle cap. You have finished installation. You have finished installation. You have finished assembly. Click You have finished assembly. Now you have completed assembling the Main Unit. General Advice • Hold the unit securely with both hands. • Install the parts securely. (You may hear clicks depending on the parts at the time of installation.) 1 Attach the Mesh Cap on the Medication Bottle. Close it securely. You have finished installation. 4 Attach the supplied Mouthpiece or Child’s Inhalation Mask to the Mask Adapter. • How to attach the Child’s Inhalation Mask • How to attach the Mouthpiece Correct Use of the Unit How to Use the Power Source How How How to Insert Batteries How to Use Adapter Batteries are not supplied. commercially available alkaline or AA batteries. Use the AC Adapter in a place where an electric outlet. Howev...