Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: Philips Dateigröße: 632.96 kb Dateiname: Unterrichtssprache:

Engl IS h 4 Preparing for use 4.1 Charging the appliance Charging the appliance takes approximately 6 hours. A fully charged appliance has a cordless operating time of up to 30 minutes. 1 2 Make sure the appliance is switched off. Inser t the small plug in the socket of the charging stand (1), put the adapter in the wall socket (2), remove the protection cap (3) and put the appliance in the charging stand (4). (Fig. 2) 3 The charging light flashes white to indicate that the appliance is charging. When the batter y is fully charged, the charging light lights up white continuously. (Fig. 3) 4.2 Battery-low indication • When the batter y is almost empty, the charging light flashes amber for 15 seconds.The batter y still contains enough energy for a complete treatment. (Fig. 4) To charge the appliance, follow the steps in section ‘Charging the appliance’ above. Engl IS h Engl IS h 5.1 Brush heads5 Using the appliance The VisaPure comes with two different brush heads: • normal, for all skin types; • Sensitive, specifically designed for sensitive skin. Make sure the appliance is fully charged before you use You can use the brush head that suits your skin best. it for the first time. D Note: You can either use the appliance in front of the sink, in the shower or in the bathtub. 5.2 Daily facial cleansing with VisaPure 5.2.1 Speed settings You can choose between two different speed settings depending on your personal preference. • Speed one, ‘gentle cleansing’, for a mild and soft cleansing. • Speed two, ‘deep cleansing’, for a comfor table and more intensive cleansing. 5.2.2 Skin zones • The face can be divided into three zones: right cheek, left cheek and T-zone.The cheek zones include the chin, the area between nose and upper lip and the area between eyes and ears.The neck and decollete can also be divided into three zones. (Fig. 5) D Note: Do not use the appliance on the sensitive skin area around the eyes. 5.2.3 Skin Zone timer When you switch on the appliance, it works for three periods of 20 seconds. Between these periods, there is a shor t pause to indicate that you should move the brush head to another skin zone. 5.2.4 Auto shut-off The appliance automatically switches off after one minute 3 4 Place the brush head on your skin. Press the on/off button once to switch on the Engl IS h to prevent over treatment. appliance.The appliance star ts to operate at speed 1. Press twice for speed 2. Press three times to switch off the appliance or wait until it stops automatically. (Fig. 7) 5.2.5 Cleansing procedure 5 gently move the brush head across your skin while making circular movements. Do not push the brush D Note: head too hard onto the skin to make sure the You can use the appliance twice a day. treatment remains comfor table. (Fig. 8) 6 After 20 seconds, the appliance briefly pauses to let 1 2 Push the brush head onto the connection pin until it you know that you have to move to another zone. locks into position with a click. (Fig. 6) Do not overdo the cleansing and do not cleanse Moisten the brush head with water and apply the cleanser any zone longer than 20 seconds. to your face. Alternatively, you can moisten the brush head directly with liquid cleanser. Do not use the appliance with a dr y brush head, as this can irritate the skin. 11 6 Cleaning and maintenance never use scouring pads, abrasive cleaning agents or aggressive liquids such as alcohol or acetone to clean the appliance. 6.1 Cleaning the appliance and the brush head Clean the appliance and the brush head thoroughly with water after each use, to ensure optimum performance. Make sure the appliance is switched off before you star t cleaning it. 1 Rinse the handle and the brush head under the tap with warm water (max. 40.C / 104.F). (Fig. 9) 2 Clean the back of the brush head and the connection pin of the appliance under the tap at least once a week. (Fig. 10) 3 Dr y these par ts with a towel. 6.2 Cleaning the adapter and the charging stand A Danger: Always keep the adapter dry. Never rinse it under the tap or immerse it in water. 1 Make sure the adapter is unplugged when you clean it. Only wipe it with a dr y cloth. 2 Always detach the charging stand from the adapter before you clean it. (Fig. 11) 3 You can clean the charging stand with a moist cloth. Dr y the charging stand before you reconnect it to the adapter. (Fig. 12) 7 Storage • Store the appliance with the brush head attached in the charging stand. (Fig. 13) • For travelling: put the protection cap on the dr y brush head to protect the brush head filaments when you take the appliance with you. (Fig. 14) D Note: never store a wet brush head in the protection cap. Engl IS h 8 Replacement 9 Environment 8.1 Brush head replacement Worn filaments could lead to skin irritation.Therefore the brush head should be replaced ever y 3 months or earlier if the filaments are deformed or damaged. Replacement brush heads and additional brush head types are available from our website www.shop.philips.com...

Herunterladen

Geben Sie zwei Ziffern: