Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: Philips Dateigröße: 1.1 mb Dateiname: Unterrichtssprache:

setting the clock 1 ,2 ,3 4 5 Press the on/off button briefly to turn on the appliance (Fig. 6). The touchscreen display goes on. Press the alarm button and the timer button simultaneously for 2 seconds (Fig. 7). The clock time starts to flash on the display (Fig. 8). Set the clock time with the plus or minus button. If you keep the button pressed, the time moves forward or backward quickly (Fig. 9). To switch between the 12-hour (a.m./p.m.) and 24-hour time indication, press the timer button and minus button simultaneously for 2 seconds. Press either the alarm button or the timer button or wait 10 seconds to exit the time-setting mode. setting the timer You can use the timer function to set the light time. 1 Press the on/off button briefly to turn on the appliance (Fig. 6). The touchscreen display goes on. ,2 Press the timer button (Fig. 10). 14 EnglisH The timer on-indication and the timer countdown time start to , flash (Fig. 11). 3 Press the plus or minus button to set the session time. If you keep the button pressed, the time moves forward or backward quickly (Fig. 9). You can set a time from 1 to 60 minutes. The set session time is stored in the memory. , The timer-on indication and the timer countdown time stop , flashing. Note:When you turn on the appliance, the timer counts down the set time. When the countdown is finished, the LED panel turns off automatically. demo mode The demo mode is used to demonstrate the goLITE BLU energy light in stores. When the appliance is turned on in demo mode, customers of the store can: -adjust the light intensity -turn the appliance on and off -set the alarm -set the light time If the appliance is not operated for 3 minutes, it rever ts to its demo mode default settings. To activate the demo mode: 1 Make sure the appliance is turned off. Note: If you want to turn off the appliance, press and hold the on/off button for 2 seconds. 2 3 Put the adaptor in the wall outlet and insert the appliance plug into socket on the appliance. Press and hold the on/off button for 10 seconds (Fig. 6). The appliance turns on and the word ‘DEMO’ appears on the , display. The LED panel goes on at a light intensity of 25%. , EnglisH 15 The display shows a timer countdown time of 15 minutes, but the , timer does not count down. It only starts to count down when the timer time is adjusted. The display shows an alarm time of 12:00 a.m. and shows the , normal clock time, but the alarm mode is off. Note:The appliance remains turned on in demo mode until it is turned off. To deactivate the demo mode, press and hold the on/off button for 10 seconds. Using the appliance Use this appliance for its intended household use as described in this manual. 1 Press the on/off button briefly to turn on the appliance (Fig. 6). The touchscreen display goes on. , Note: If you do not touch the display or press any button for 5 minutes when the display is turned on and the appliance operates on battery power, the appliance turns off automatically to save battery power. Note: If you want to turn off the appliance, press and hold the on/off button for 2 seconds. 2 Briefly press the on/off button again to turn on the LED panel. The timer counts down the set time. , Note:The default session time is 15 minutes. Use the timer to change the session time (see section ‘Setting the timer’ in chapter ‘Preparing for use’). When the countdown is finished, the LED panel turns off , automatically. Note: If you want to turn off the LED panel before the countdown is finished, press the on/off button briefly. 3 Press the plus or the minus button to change the light intensity (Fig. 9). You can increase or decrease the intensity in increments of 25%. 16 EnglisH Pausing a session 1 Press the on/off button or press the minus button to reduce the intensity to 0%. The remaining minutes of the session are still shown on the display. ,2 Press the on/off button to continue the session or press any of thetouchscreen buttons to end the session. Note: If you pause a session while the appliance operates on battery power and do not continue the session within 5 minutes, the appliance turns off automatically. setting the alarm The alarm has three modes: chime only, light only or both chime and light. 1 ,2 ,3 4 5 ,6 7 Press the on/off button briefly to turn on the appliance (Fig. 6). The touchscreen display goes on. Press the alarm button (Fig. 12). The alarm indications start to flash (Fig. 13). Press the plus or minus button to switch between the three alarm modes: chime only, light only or both chime and light (Fig. 9). Press the alarm button twice or wait 10 seconds to store the selected mode. To set the alarm time, press the alarm button twice. The alarm time starts to flash. Press either the plus or the minus button to set the desired time. If you keep the button pressed, the time moves forward or backward quickly. Press the alarm button or wait 10 seconds to store the set alarm time. Note:The set alarm mode and time remain stored in the ...

Herunterladen

Geben Sie zwei Ziffern: