Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Do not use them for other purposes. , The protective goggles comply with protection class II according to directive 89/686/EEC. , Switch on the tanning lamps by pressing the green I button. The display shows the remaining tanning time. , During the tanning session, the dot next to the time indication blinks. , If you want to switch off the appliance during the tanning session, press the red \ button. , You can adjust the intensity of the face tanner during the tanning session (HB595 only). Use the and ™ buttons to select . and then , . set the desired intensity.The new setting becomes active immediately. If you do not adjust the intensity within approx. 5 seconds, the remaining tanning time is shown on the display again. If you want to set the facial tanner from 0 (off position) to 1 or 2 while the lamps have not yet cooled down sufficiently (min. 3 minutes), , the 0 symbol will blink on the display. You can adjust the body cooler setting during the tanning session. Use the and ™ buttons to select > and then set the desired setting. , . The new setting becomes active immediately. If you do not adjust the body cooler within approx. 5 seconds, the remaining tanning time is shown on the display again. During the last 5 seconds of the tanning session, you hear a beeping sound and the appliance switches off automatically after these 5 , seconds. stereo active speakers During tanning, you can listen to your own favourite music by connecting your own audio player (e.g. CD/MP3 or radio) to the appliance. To connect your own audio player to the appliance, use the cable with 2 jack plugs supplied with the appliance. Insert one jack plug into the AUX socket. EnglisH Insert the other jack plug into the headphone socket of your audio player (e.g. CD, MP or radio). You can adjust the volume on your own audio player. , -Do not set the volume extremely high, as this could cause irreparable damage to the speakers. -In fact, we advise you to set the volume lower than you are accustomed to, because the space between couch and canopy works as an acoustic box and amplifies sound. Cleaning Always unplug the appliance and let it cool down before you clean it. Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance. Never use liquids such as alcohol, methylated spirits, petrol or acetone to clean the acrylic sheets, as this causes irreparable damage. Clean the outside of the appliance with a damp cloth. , Do not let any water run into the appliance. Clean the protective goggles with a moist cloth. , Replacement The light that the tanning lamps emit becomes less bright in time (i.e. after a few years in case of normal use). When this happens, you notice a decrease in the tanning capacity of the appliance. To solve this problem, set a slightly longer tanning time or have the tanning lamps replaced. The control panel of the appliance includes a counter that registers the number of operating hours. To see the number of operating hours, select function •. Set the time to 00 and hold down the red \ button to display the number of , operating hours. After 500 burning hours, appears on the left-hand side of the display.This means that the tanning power of the appliance has decreased so oe much that replacement of the tanning lamps is advisable. Of course, you can choose to postpone replacement for a while by setting a longer tanning time. The maximum number of hours the counter can display is 999. After it has reached this number, it star ts to count upwards from 000 again. To reset the number of operating hours to 000, press the \ button, while time indication 00 and function symbol • are shown on the display. Hold down the \ button and first press the + button and then the - button. If the was on the display, it disappears. The number of operating oe hours is reset to 000. Have the tanning lamps and/or star ters replaced by a ser vice centre authorised by Philips.They have the knowledge and skills required for this job and the original spare par ts for the tanning appliance. If you really insist on replacing the tube lamps and/or starters yourself, proceed as follows: , 1 Remove the mains plug from the wall socket. Undo the screws of the end cover at the head of the canopy and remove the end cover. (Fig. 1 ) First pull the acrylic sheet approx. 10cm out of the canopy (1).Then undo the snap strip on the rear side of the canopy ( ). (Fig. 15) Do the same with the snap strip on the front side of the canopy. 5 Remove the acrylic sheet. (Fig. 16) Now you can remove the tube lamps and the starters. , Note:You can now also clean the acrylic sheet, if you want. Note:The lamps and/or starters in the couch and the canopy are replaced in the same way.The starters are located at one of the lamp ends. To remove the lamps, turn them to the left or to the right so that you can lift them out of their holders. To remove the starters, turn them to the left. Insert new lamps and/or starters ...