Stimmen - 1, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Using the VPAP IV and VPAP IV ST Setting up your VPAP 1 Connect the power cord to the socket at the rear of your VPAP. 2 Plug the other end of the power cord into the power outlet. 3 Connect one end of the air tubing firmly onto the air outlet. 4 Connect the assembled mask system to the free end of air tubing. For information on assembling your mask, see your mask manual. ! WARNING •Make sure the power cord and plug are in good condition and the 1234 ! equipment is not damaged. • Only ResMed air tubing and accessories should be used with the device. Do not use electrically conductive or antistatic hoses. A different type of air tubing or accessory may alter the pressure the patient receives, reducing the effectiveness of the treatment. • Blocking the hose and/or air inlet of the device while in operation could lead to overheating of the device. CAUTION • Be careful not to place the device where it can be bumped or where someone is likely to trip over the power cord. • If you put the device on the floor, make sure the area is free from dust and clear of bedding, clothes or other objects that could block the air inlet. English Using the VPAP IV and VPAP IV ST Attaching a H4i Humidifier The H4i humidifier attaches to the front of a VPAP IV or VPAP IV ST device to provide heated humidification. These devices automatically detect the presence of the H4i and no other accessories are required for its use. For more information on using your H4i, please refer to the H4i user guide. WARNING • Make sure that the water chamber is empty and thoroughly dried before transporting the H4i. • When using the travel bag, always separate the VPAP unit and the H4i and place the H4i in its pouch. How to Use the Control Panel ! LCD screen Keypad Start/Stop Key The control panel of your VPAP device includes an LCD screen which displays the menus and treatment screens as well as a keypad for navigating through the menus and delivering treatment. The keypad has the following keys: Key Function Start/Stop Starts or stops treatment. Extended hold for at least three seconds starts the mask-fit feature. Up Allows you to increase settings options and scroll through the menu. Allows you to decrease settings options and scroll through the Down menu. Performs the function indicated by the guiding text displayed above Left it on the LCD screen. Guiding text includes menu, change, and apply. Performs the function indicated by the guiding text displayed above Right it on the LCD screen. Guiding text includes exit and cancel. Using the Menus The VPAP IV and VPAP IV ST provide a set of functions which are arranged in menus and submenus. Via the LCD screen, the menus and submenus allow you to view and change the settings for a particular function. To navigate and make selections: 1 Press or to scroll through items within a level. 2 Press to enter a submenu and to apply an option choice. 3 Press to navigate out of a menu or submenu and to exit without changing options. Your clinician has preset the menu to either a standard menu or an advanced menu. The following illustration summarises these views: RAMP: 10min menu WELCOME >>>>>> 00006/00012 days USED: 00090hrs SW: SX459-0200 exit MASK: ULTRA change exit SETTINGS enter exit RESULTS enter exit enter exit OPTIONS TUBE LENGTH: 2m change exit SMARTSTART: OFF exit MASK: ULTRA change exit LEAK ALERT: ON change exit LANGUAGE:ENGLISH change exit SMART DATA enter exit enter exit SERVICING SW: SX459-0200 exit SN: 20080102356 exit AUTO APPEAR: ON change exit SMART DATA enter exit USED: 00090hrs 00003/00122days MASK FIT: ***** excelnt exit PRESSURE: 8.0 exit USAGE: 4.00hrs exit Standard Menu Advanced Menu These menus only appear if your clinician has enabled Smart Data. English Using the VPAP IV and VPAP IV ST How to Select the Mask Type Scroll to MASK and select . Press or until you see the setting you require. The following table shows the setting that should be selected for each mask: Settings Mask ULTRA Ultra Mirage Nasal Mask Ultra Mirage II Nasal Mask MIR FULL Mirage Liberty Full Face Mask Mirage Quattro Full Face Mask Ultra Mirage Full Face Mask ACTIVA Mirage Activa Nasal Mask SWIFT Mirage Swift Nasal Pillows System Mirage Swift II Nasal Pillows System STANDARD Mirage Vista Nasal Mask Mirage Micro Nasal Mask MIRAGE Mirage Nasal Mask SmartStart™ If your clinician has enabled SmartStart/Stop, your device will start automatically when you breathe into your mask and stop automatically when you take your mask off. Starting Treatment 1 Make sure the power is on. The product name is displayed briefly on the LCD screen, then the standby (Ramp) screen appears. The key and LCD backlights also turn on. 2 Fit your mask as described in the mask user instructions. ! WARNING A mask should not be used unless your VPAP device is turned on and operating properly. 3 Alter the ramp time if required. 4 To start therapy, simply breathe into the mask or press 5 Lie down and arrange the air tubing so that it is free to move i...
Dieses Handbuch ist für folgende Modelle:Andere persönliche Geräte - Positive Airway Pressure Device VPAP IV ST (301.97 kb)