Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
C Page: 2-4 A A A A A APrint Spec Number: 491842-00 A A A A A ACurrent Date: 11/18/94 ECN Date: 11/29/94 A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AA Host Adapter Configuration Jumper Block J6 Extra Jumper SD SD SD IC IC DC DC SP Default Setting Pin Pair Description SD Set host adapter SCSI ID = ID 6 SD SD SD = ID 7Q SD SD SD = ID 4 SD SD SD = ID 5 SD SD SD = ID 3 SD SD SD = ID 2 SD SD SD = ID 0 SD SD SD = ID 1 SD SD SD IC Set host adapter IRQ host adapter You must also set pin pairs on jumper block J9 = IRQ 9 IC IC = IRQ 10 IC IC = IRQ 11Q IC IC = IRQ 12 IC IC DC Set host adapter DMA (only if DMA enabled on J5) You must also set pin pairs on jumper block J8 = Channel 0Q DC DC = Channel 6 DC DC = Channel 5 DC DC = Channel 7 DC DC SP Enable/disable parity checking Parity enabledQ = no jumper Parity disabled = jumper Q Default setting AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A A AAHA-1510A/20A Series User’s Guide A A A AStock Number: 510400-00, Rev. C Page: 2-5 A A A A A APrint Spec Number: 491842-00 A A A A A ACurrent Date: 11/18/94 ECN Date: 11/29/94 A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AA AHA-1510A/20A Series User’s Guide Jumper Block J7 The host adapter floppy controller is enabled when the jumper is installed on jumper block J7. = Floppy = Floppy EnabledQ Disabled Q Default setting Caution: If the host adapter floppy controller is enabled, you must disconnect all other floppy controllers to avoid system hang. Jumper Block J8 This jumper block is used only when DMA is enabled on jumper block J5 pin pair DT. 1 DR D6 D5 D0 DA D6 D5 D0 Default Setting DMA Channel Set DMA channel Channel 0 Channel 5 Channel 6 Channel 7 You must also select the sameinterrupt channel with the DC pin pairs on jumper block J6. Set J8 Pin Pairs D0, D0 D5, D5 D6, D6 DR,DA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAHA-1510A/20A Series User’s Guide A A A A A AStock Number: 510400-00, Rev. C Page: 2-6 A A A A A APrint Spec Number: 491842-00 A A A A A ACurrent Date: 11/18/94 ECN Date: 11/29/94 A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AA Host Adapter Configuration Jumper Block J9 (AHA-1520A/1522A) I2 I1 I0 I9 AL J6 J4 BE Default Setting Pin Pair Description I2, I1, I0, I9 Set host adapter IRQ channel IRQ 12 = jumper I2 IRQ 11Q = jumper I1 IRQ 10 = jumper I0 IRQ 9 = jumper I9 (not recommended with Windows 3.x) You mustalso set the corresponding IC pin pairs on jumper block J6. AL Set port address 340h Q = no jumper 140h = jumper (extra jumper provided) The host adapter BIOS supports booting only for the default port address of 340h. J6, J4 Set BIOS address l...
Dieses Handbuch ist für folgende Modelle:Andere - AHA-1520A (270.8 kb)
Andere - AHA-1510A (270.8 kb)