Stimmen - , Durchschnittliche Bewertung:
(
)
)
Hersteller: Adaptec
Dateigröße: 269.35 kb
Dateiname:
Unterrichtssprache:
Das Dokument wird geladen, bitte warten
 |
Das Dokument wird geladen, bitte warten
Anleitung Zusammenfassung
It also describes how to connect internal Serial ATA devices to your ASH-1205SA card. 1 Kit Contents Your SATAConnect ASH-1205SA kit includes: ¦ Adaptec ASH-1205SA Serial ATA (SATA) card ¦ Internal SATA cable ¦ SATAConnect CD, including drivers, software, and documentation ¦ SATAConnect floppy disk, including drivers for use during Windows XP or Windows 2000 installation ¦ Adaptec SATAConnect ASH-1205SA Installation Guide System Requirements To use your ASH-1205SA card, you need a PC-compatible desktop computer with: ¦ A Pentium processor, or higher ¦ Windows® 98SE, Microsoft Windows 2000®, Windows Me®, or Windows XP® ¦ An available PCI 2.2-compliant slot ¦ An available SATA drive ¦ CD-ROM or DVD-ROM drive ¦ Floppy disk drive 2 This Is Your ASH-1205SA PCI Connector SATA Connector 1 SATA Connector 2 Installation Overview To successfully complete the installation of your ASH-1205SA, complete the following tasks: ¦ Install the ASH-1205SA card. See page 4. ¦ Install and connect your internal SATA devices. See page 6. ¦ Install the ASH-1205SA driver. See page 7. 3 Installing the ASH-1205SA Card To install your ASH-1205SA: 1 Turn off your computer, disconnect the power cord, and ground yourself by touching the metal chassis. 2 Remove the computer cabinet, following the manufacturer ’s instructions. 3 Find an unused, unobstructed PCI expansion slot. Unscrew the expansion slot cover screw and remove the slot cover to provide an opening. Save the slot screw for use in Step 6. 4 5 4 Remove the ASH-1205SA card from its antistatic packaging. Always handle the card by its edges. 5 Place the card in the PCI expansion slot and press down firmly until the card is fully seated. 6 Secure the card bracket with the screw you removed in Step 3. 7 Do not close the computer cabinet or reattach the power cord yet. Continue with Installing and Connecting Devices on page 6. Installing and Connecting Devices You will need one SATA cable and one standard or SATA power cord for each SATA device you plan to connect to your ASH-1205SA. (Refer to your device’s documentation to determine which type of power cord to use.) One SATA cable is included in your SATAConnect kit. You can connect a maximum of two SATA devices to your ASH-1205SA, one to each connector on the card. To complete the installation: 1 If your computer is not already open, follow the instructions provided in Step 1 and Step 2 on page 4. 2 Mount the first device in an available bay inside your computer. Refer to the computer ’s documentation for instructions. 3 Plug one end of the SATA cable into Conn...