Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
LED Red(+) / White(-) Different Motherboards have different installation areas, specifications, screw holes and connectors. Please read the motherboard user manual supplied by the motherboard manufacturer. 4-5 Connection of Fan Power Cable This chassis has 1 x 12cm silent blue LED cooling fan at the front and 2 x 12cm silent blue LED fans at the rear. There are internal connectors that connects the front and rear fans making it into a single 3-pin power connector. .Required Tools: None.. 4-5.1 Insert the 3-pin connector into the system fan power connector on the motherboard. 4-6 Installation of 5.25” Front Device Bay 4-7 Installation of 3.5” Front Device Bay Installation of 3.5” front device is the same as 5.25” front devices, please refer to step 4-6. 4-8 Installation of 3.5” Internal Device Bay This chassis provides a removable/dual directional HDD rack to accommodate up to 5 hard disc drives. .Required Tools: Thumbscrews (4 per hard disc drive). Remove the corresponding EMI plate and attach the front panel onto the chassis. Detach the front panel (see step 1-3.2 on page 6) and remove the front drive rail. 6.2 6.1 Installation complete Secure the 5.25” device with the internal latch. Refer to the figure for installation procedure. 2 Lock 1 6.3 6.4 Slide the HDD into the rack and secure the HDD with the thumbscrews. 8.2 8.1 4-9 Application of Removable/Dual Directional HDD Rack This chassis includes a removable/dual directional HDD rack for preferred installation direction and optimal heat dissipation. .Required Tools: None. 4-10 Application of Security Lock This chassis includes a safety lock on the side panel. Insert the key into the lock and rotate it 90 degrees according to the diagram to lock and unlock it 4-11 Application of Foot Supports This chassis consists of four foot supports for ensuring the casing is firmly seated on the holding surface. Swivel the foot support 90° according to the diagram to open or retract. In case the length of the power cable is not sufficient for installation of the bottom HDDs, please use the power extension cable which can be found inside the accessory box. Connect it according to the type of connector of your HDD. 9 .1 9.2 4-9.1 Remove the thumbscrew that secures the removable HDD rack. 4-9.2 Unlock tool-free fastener of the removable HDD rack by pushing it downwards. A A B 4-9.3 Change the HDD rack directional alternating fastener on top of the rack and align the arrows for desired direction. (Dual Direction Only) B 4-12 Application of Liquid Cooling System This chassis fully supports Gigabyte Tech. 3D Galaxy series liquid cooling system (also supports most of the liquid cooling s...