Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: Philips Dateigröße: 2.33 mb Dateiname: Unterrichtssprache:

• Left analog and right analog sticks - each contain two axes Left analog stick controls the X and Y axis Right analog stick controls the Rz and Z axis Also, there is a “hidden” button “11” and “12” under each stick that are activated when the analog stick is depressed inward The ‘hidden’ buttons function in both analog and digital modes • Buttons “5”, “6”, “7”, and “8” are all digital shoulder buttons • Analog button - used to switch the controller from digital to analog mode (and vice versa) Digital mode is the default mode The red LED will illuminate when the controller is in analog mode and off in digital mode • Turbo Button - Use when desiring to engage the controller in a repeating mode (Auto Fire) • Start / Select buttons-serve as digital buttons (9,10) See game manual for use of these buttons • F Connect Button - This button is found on the SGC2910 Wireless PC Controller and on the docking receiver marked with PHILIPS logo This button is used to force link a SGC2910 Wireless PC Controller and docking receiver An advanced feature of this function is as follows; Suppose player 2 wants to change to player 1, just press the F Connect button on his SGC2910 Wireless PC Controller, then press the F Connect button on the player 1 receiver, his controller will become player 1 controller Power Switch The power switch is located on the back of the SGC2910 Wireless PC Controller The switch can be set to three settings as shown in the CONTROLLER DIAGRAM (photo 3) image Off setting will turn the SGC2910 Wireless PC Controller power off On setting turns the SGC2910 Wireless PC Controller power on Vibration off setting turns the SGC2910 Wireless PC Controller power on, but the vibration feedback is powered off to conserve battery and enable longer playing time 4 ENENButton Descriptions Button Descriptions Analog Button Use to switch between digital and analog Digital mode is the default mode In digital mode, the left analog stick digital controls the X and Y axis The right analog stick emulates the 1, 2, 3, and 4 action buttons In the analog mode, the Digital directional pad functions as a point of view hat while the left analog stick controls the X and Y axis The right analog stick controls the Rz and Z axis The LED light nearest to the Analog button will be illuminated when Analog mode is on Note:The D-pad functions as a point of view control for most software titles, but may operate differently depending on the design of each individual game Turbo Button The turbo feature of the SGC2910 Wireless PC Controller allows the user to set various keys as a turbo fire (Auto Fire) “repeating mode” This means that user can then hold down the button of his/her choice and the action will be repeated (without having to hit the button numerous times) This is especially useful in games that require weapons to be fired over and over again. Programming Instructions: Press and hold the desired fire button then press the turbo button one time (LED Illuminates and Flash).You now have turbo fire. Repeat and you will remove turbo fire.When turbo fire is used, the LED within the turbo button will flash.Turbo fire can be assigned to buttons 1,2,3,4,5,6,7,8, 11,12, Select and Start. Note:Turbo fire will also work with your custom profiles. In this instance the turbo fire will repeat the keyboard key that was programmed to the SGC2910 Wireless PC Controller button Force Connect Button The F Connect button is used to force link the SGC2910 controller and docking receiver The F Connect button is found on the SGC2910 Wireless PC Controller and docking receiver marked with PHILIPS logo By pressing the F Connect button on SGC2910 Wireless PC Controller and the docking receiver, you can force these two devices to connect This feature is used when multiple SGC2910 Wireless PC Controllers are used in the same location Auto Sleep The SGC2910 Wireless PC Controller will enter sleep mode after 1 minutes without any activity This mode will conserve battery life Press the Select, Start, Button 11, or Button 12 to wake up the SGC2910 Wireless PC Controller Vibration Feedback The SGC2910 Wireless PC Controller has two internal motors Their weights are unbalanced to provide vibration when it is activated by game software Note:The vibration feedback will only function with software titles that support vibration You must install the SGC2910 Wireless PC Controller software There are many different force feedback and rumble effects available, however due to differences in software and hardware design, the SGC2910 Wireless PC Controller may not support all effects.You will find that the range of effects that the SGC2910 Wireless PC Controller supports will vary from game to game 5 EN Installation Installation Installation Installation procedure for users of Windows® XP & 2000 To properly install your SGC2910 Wireless PC Controller, the controller must be connected to your USB port first. Once Windows XP and 2000 have properly loaded the HID (human interface ...

Herunterladen

Geben Sie zwei Ziffern: