Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Bosch Dateigröße: 33.16 kb Dateiname: a82e5e15-6f5b-a464-8546-9fde23afc4b0.pdf Unterrichtssprache:

1. Follow all operating and safety procedures attached to the charger. 2. Use only Bosch battery pack catalog numbers BAT043 12V, BAT045 12V, BAT040 14.4V, BAT025 18V, BAT026 18V, BAT030 24V, and BAT031 24V. 3. Do not wash the Flashlight with water nor keep in a damp location. If the Flashlight gets wet, dry it off as soon as possible. 4. The Flashlight is ruggedly constructed. It should, however, be handled with care. Do not disassemble or forcibly twist head beyond it’s stopping point. C B A D E 5. Check the charge level at least once a month, especially if used for emergency purposes. If the light seems dimmer, recharge the battery pack. Releasing and inserting battery pack Release battery pack A from tool by pressing on both sides of the battery release tabs B and pull downwards. To insert battery A, align battery and slide battery pack into tool until it locks into position. Do not force. Operation 1. To turn the Flashlight "ON", squeeze and release trigger switch C. To turn Flashlight "OFF", squeeze and release trigger switch C. 2. Your Flashlight has a swivel head that can be rotated to desired position. To change the position of the head, rotate counterclockwise until it stops. To return head to it’s original position, rotate the head clockwise until it stops. Replacing Light Bulb WARNING! WARNING! Always remove the battery pack, or corded back-up from handle before changing the bulb. All repairs, electrical or mechanical, should be attempted only by trained repairmen. Contact the nearest Bosch Factory Service Center, Authorized Service Station or other competent repair service. 1. Rotate lens cap D counter clockwise and carefully remove lens cap D. 2. Remove bulb E from spring. 3. Reinstall replacement bulb E in spring. 4. Reinstall lens cap D and rotate clockwise to tighten. Note: One replacement bulb is provided, located inside head of the unit. WARNING! Do not position the lighted Flashlight head on or near flammable or combustible materials. The bulb gets hot during use. WARNING! Do not splash the lighted Flashlight bulb with liquids. Hot bulb may shatter when cooler liquids are contacted. “Refer to tool’s instruction manual for terms of the Limitation of Warranty.” Lampe torche Bosch modeles 3455 12V, 3454 14.4V, 3453 18V, et 3452 24 Volt Veuillez lire ces consignes attentivement avant le fonctionnement afin d'utiliser le lampe torche efficacement et d'obtenir des prestations maximales. Veuillez conserver ces consignes pour consultation future. 1. Suivez toutes les consignes de fonctionnement et de securite fixees au chargeur. 2. Utilisez uniquement les blocs-piles Bosch numero de catalogue BAT043 12V, BAT045 12V, BAT040 14.4V, BAT025 18V, BAT026 18V, BAT030 24V et BAT031 24V. 3. Ne lavez pas le lampe torche a l'eau et ne le gardez pas a un endroit humide. Si le lampe torchele se mouille, sechez-le des que possible. 4. Le lampe torche a une construction robuste. Il doit, toutefois, etre manie avec soin. Ne demontez pas la tete et ne...

Herunterladen

Geben Sie zwei Ziffern: