Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Key product features are: • 5V 0.5A power consumption • Supports resolutions to UXGA • Up to 165 MHz pixel rates Installation Figure 1: Location of Input/Output Connections 1. Connect the DVI source device to the splitter marked INPUT on the B116-002. (Figure 2) Figure 2: Connection of DVI Sources 2. Connect the DVI cables between the DVI displays and the B116-002 splitters marked OUTPUT MASTER and OUTPUT SLAVE. Make sure that the DVI source cables are connected to the INPUT port, and that and the DVI display cables are connected the OUTPUT ports. (Figure 3) Figure 3: Connection of DVI Display 3. Connect the cord from the DC adapter to the DC 5V jack and plug it into a wall outlet. The front POWER LED will illuminate.(Figure 4) Figure 4: Connection of DC Adapter 4. Turn on the power to your DVI display before powering your DVI sources. Troubleshooting If you experience problems with your B116-002, switch, try the following remedies: • Ensure that source and display cabling is working properly. Connect a DVI cable between the source and the display to verify that the cable is functional. Repeat to test all cables. • If DVI cables are functioning properly, use two cables to test the ports on the B116-002 splitter. Connect one cable between the DVI source and the INPUT port. Use the second cable to plug between the OUTPUT MASTER and theDVI display. Using the same display, continue testing by connecting the display to OUTPUT SLAVE. If all ports work, the B116-002 is functioning correctly. • If the unit is plugged in and the Power LED is not lit, verify that the power supply is functioning. Use a voltmeter to measure the output of the DC adapter to verify that 5V is present. If output is 5V, the DC adapter is functionaland the B116-002 switch has failed. Note: The positive (+) is in the middle of the plug and the ground (-) is on the exterior of the plug. Figure 1. Figure 2. Figure 3. Figure 4. Warranty & Warranty Registration on Page 4 Note: Follow these instructions and operating procedures to ensure correct performance and to prevent damage to this unit or to its connected devices. Copyright © 2007 Tripp Lite. All rights reserved. Manual del Propietario Divisor de Senal 1-a-2 para Acoplamiento Sencillo a DVI 1111 W. 35th Street Chicago, IL 60609 EE.UU. Atencion al cliente: (773) 869-1234 • Model: B116-002 Contenido del Empaque • Divisor de Senal 1-a-2 para Acoplamiento Sencillo a DVI B116-002 • Adaptador CA (100-240V), Salida de 5V 0.5A • Manual del Propietario Caracteristicas y Descripcion del Producto El Divisor de Senal 1-a-2 para Acoplamiento Sencillo a DVI B116-002 permite que una sola fuente DVI sea dividida y proyectada en dos monitores DVI simultaneamente. Las caracteristicas principales del producto son: • Consumo de 5V 0.5A• Soporta resoluciones a UXGA • Velocidad de pixeles hasta 165 MHz Instalacion Figura 1: Ubicacion de las Conexiones de Entrada y Salida 1. Conecte el dispositivo fuente del DVI al divisor marcado INPUT [ENTRADA] en el B116-002. (Figura 2) Figura 2: Conexion de la Fuentes del DVI 2. Conecte los cables del DVI entre las pantallas DVI y el divisor de senal B116-002 marcados OUTPUT MASTER [SALIDA MAESTRA] y OUTPUT SLAVE [SALIDA ESCLAVA]. Asegurese que los cables de la fuente DVI estan conectados al puerto INPUT [ENTRADA] y que los cables de la pantalla DVI estan conectados a los puertos OUTPUT [SALIDA]. (Figura 3) Figure 3: Conexion de la pantalla DVI 3. Conecte el cable del adaptador CD al enchufe CD 5V y ...