Stimmen - 5, Durchschnittliche Bewertung: 4.4
(
)
)
|
Anleitung Zusammenfassung
Turn the tune knob to select the preset location (1-18) where you wish to store the preset. when the preset position is displayed (for example PRE1) press “SEEK V” to store the preset into memory. The screen will display “PR SAVED” and your preset has been stored into memory. Recall Presets To recall a preset saved in memory, press PRESET 2 to enter the preset menu. Use the tune knob to scroll through the stored preset stations. when the desired preset is displayed, press the “SEEK .” button to select it. Exit menus Press PRESET 1 to exit the preset menu and continue playing the current station. “EXIT” will be displayed when button is pressed. You can also wait the allotted 10 seconds and the menu will exit automatically. 8. Sirius Satellite Radio Operation Entering Mode Select Menu Press the “XM” icon. Immediately turn the TUNE KNOB to scroll through available sources. Once “SIRIUS” is displayed, press PRESET 2 to select the displayed mode. Channel Up Turn the rotary TUNE KNOB clockwise to move up through the channels. Channel Down Turn the rotary TUNE KNOB counter-clockwise to move down through the channels. Category Selection Press the “Category” icon then press the icon that corresponds with the Category you wish to select. Store Presets Press and hold the preset button on which you want to store the channel. Please Note: If you are using the Media Gateway to add Sirius but still have factory XM installed, it is important to keep the presets in seperate banks. Recall Presets Press the preset button that corresponds with the channel you want to recall. Steering Wheel Controls Press the “^” button to cycle up through the presets. Press the “Ў” button to cycle down through the presets. Press the “>I” button to tune within a category. 8. Selecting AUX Input Press the “XM” icon. Immediately turn the TUNE KNOB to scroll through available sources. Once “AUX” is displayed, press PRESET 2 to select the displayed mode. 9. Selecting Factory Installed Sat (if equipped) Press the “XM” icon. Immediately turn the TUNE KNOB to scroll through available sources. Once “SAT” is displayed, press PRESET 2 to select the displayed mode. Factory Sat Operation Refer to the owners’ manual that came with your vehicle. 10. Troubleshooting Symptom Cause Remedy Radio shows iPod not connected iPod cable is not connected to iPod or Gateway. Verify the docking cable is connected to the Media Gateway, and the iPod I can not correctlycontrol the iPod through the radio. The iPod firmware may be outof date. Update iPod firmware for free at apple.com/ipod/download I have updated myiPod’s firmware and still have control issues Sometimes the iPods needs to be reset Press and hold the click wheel (centerbutton) and the menu button for 10 seconds. This will reboot the iPod. YOU WILL NOT LOSE MUSIC on the iPod by doing this reset I don’t see iPod artist or song information onthe screen The radio is displaying adifferent text field Press the Text / Scan button to see text I can’t use my iPod’s click wheel to select music The iPod is in external control mode. This allows text to be displayed on the radio screen Press the Aux / Sat button and select AUX 2 source to control the iPod manually usingthe click wheel The Media Gatewaydoes not recognizethe HD Radio tuner (HDRT) The HD tuner was not properlyconnected when the PXAMG was first connected and initialized. HDRT must be connected before the PXAMG is powered on. Disconnect the PXAMG from the vehicles harness for 5 minutes. Verify the 8 pin DIN HDRT cable is securely connected at both ends beforereconnecting the vehicle harness. Radio shows “DEV INIT” Gateway device is initializing This only occurs the first time the PXAMG ispowered on. Wait one minute, cycle ignition off and on then enter SAT Mode. When I listen to the factory AM or FM radio there is only static, noaudio. Factory antenna cable isconnected to the HD Radio tuner. Use Gateway to access HD Radio source. This will provide all AM and FM reception for your vehicle. No AM or FM reception using the HDRadio source Factory antenna cable is notconnected to the HD Radio tuner (HDRT) Remove from factory radio, connect intoHDRT module. Note* some vehicles need to use the supplied antenna adaptor to makethis connection. HD Radio station quality fluctuates or islost randomly The HD Tuner is temporarily losing reception of the DigitalHD Radio broadcast signal This is expected performance. The Digital HD Radio playback will resume in areas ofhigher broadcast signal strength. 11. Warranty One Year Limited Warranty The quality controls used in the manufacture of this product will ensure your satisfaction. This warranty applies only to the original purchaser of this product from an authorized iSimple dealer. This warranty covers any supplied or manufactured parts of this product that, upon inspection by iSimple® authorized personnel, is found to have failed in normal use due to defects in material or workmanship. This warranty does not appl...