Stimmen - 4, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Browning Dateigröße: 813.27 kb Dateiname: Unterrichtssprache:

4 Make sure the replacement bulb is installed correctly. (If you have questions contact customer service.) 6 Remove soft cloth from new replacement bulb before putting lens cover back on. 7 Replace lens cover with a clockwise motion. Care safe Body All Browning ProSteel safe paint finishes are designed for indoor use only. Use a damp rag to wipe down the surface of the safe. If something other than water is needed, a very mild soap solution may be used. However, only water should be used around the detailing areas. Care should be taken around the art scene, pinstripe, corners or logo to avoid catching and peeling any edges with the cleaning cloth. art sCene If your safe was manufactured with our exclusive art scene transfer process you must take particular care not to clean your safe with any ammonia-based cleaners. Glass cleaners like Windex® can permanently damage the art scene and other portions of the safe detailing package. Do not attach anything to the body or detailing materials with tape. Tape may remove the art scene, paint and other portions of the detailing package. 20 CarPet The key to removing stains from your carpeted interior is to clean them as soon as they occur. Do not soak the carpeting with water to remove stains. Small amounts of water can permanently damage the fire-resistant materials within your safe if the water is allowed to soak into the carpeted areas. Use any household carpet spot remover to clean up stains. Follow the directions on the product itself. dPX and dPh system interior materials Several other materials are used in the construction of the patented DPX Storage System and the DPH Storage System. No specific maintenance is required for these systems, and they can be spot cleaned using mild detergent and water on a clean cloth. Care should be taken to avoid excessive pulling on sewn seams as items are added to or removed from the pockets, pouches and loops of the DPX and DPH systems. The safe interior should always be loaded before storing any firearms on the DPX door rack to prevent tipping or weight imbalance. handle Some chemicals or abrasive cleaners can damage gold, brass or chrome handle finishes. The spokes, handle and hub on your safe should be cleaned only with a soft, damp cloth. No abrasives or chemicals of any kind should be used. loCking Bolts The tolerances between your locking bolts and the safe body and door are very tight. Because they fit so tightly, it may be necessary from time to time to place a small amount of Teflon® lubricant on the bottom of each bolt with the bolts in the extended position. mirror interior If your safe is equipped with an interior mirror on the back panel, use only rubbing alcohol or distilled water and a soft cloth to clean the mirror. Notice! follow only The recommended cleaning procedures and use only The recommended cleaning maTerials. failure To follow This informaTion could cause your mirror To become cloudy. warranty serViCe If you experience any problems with yo...

Herunterladen

Geben Sie zwei Ziffern: