Login:
heruntergeladen wurde: 0   Dateigröße: 282 kb   Hersteller: AMX  
Kategorie: Andere Home Zubehör
@name

Some states do not allow a limitation of how long an implied warranty last. Some states do not allow the limitation or exclusion of incidental or consequential damages for consumer products. In such states, the limitation or exclusion of the Limited Warranty may not apply. This Limited Warranty gives the owner specific legal rights. The owner may also have other rights that vary from state to state. The owner is advised to consult applicable state laws for full determination of rights. EXCEPT AS

heruntergeladen wurde: 3   Dateigröße: 172 kb   Hersteller: AMX  
Kategorie: Andere Home Zubehör
@name

All rights reserved. AMX and the AMX logo are registered trademarks of AMX. AMX reserves the right to alter specifications without notice at any time. 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • www.amx.com

heruntergeladen wurde: 4   Dateigröße: 172 kb   Hersteller: AMX  
Kategorie: Andere Home Zubehör
@name

The enclosures are CE, UL, and C-UL approved. RDA-ENC4 Side View (for all enclosures) 12.0" (304.8 mm) llll lllllllll nil r.....■— 12.0" (304.8 mm) f RDA-ENC6 0.75" (19.05 mm) 6.0" (152.4 mm) Installation Instructions For indoor use only. Mount on vertical surface only. Maintain 12" (304.88 mm) minimum clearance above and below the enclosure. Route class 1 conductors through upper conduit knockouts. Route class 2 conductors through lower conduit knockouts. Use 75°C (167°F) coppe

heruntergeladen wurde: 2   Dateigröße: 172 kb   Hersteller: AMX  
Kategorie: Andere Home Zubehör
@name

The enclosures are CE, UL, and C-UL approved. RDA-ENC4 Side View (for all enclosures) 12.0" (304.8 mm) llll lllllllll nil r.....■— 12.0" (304.8 mm) f RDA-ENC6 0.75" (19.05 mm) 6.0" (152.4 mm) Installation Instructions For indoor use only. Mount on vertical surface only. Maintain 12" (304.88 mm) minimum clearance above and below the enclosure. Route class 1 conductors through upper conduit knockouts. Route class 2 conductors through lower conduit knockouts. Use 75°C (167°F) coppe

heruntergeladen wurde: 1   Dateigröße: 201 kb   Hersteller: AMX  
Kategorie: Andere Home Zubehör
@name

120VAC. 2W + G CONNECTED PHASE CONTROLS ALL DIMMERS 1-6 SINGLE PHASE. 120/208VAC. 3W + G B c □1 A B mm C A B C A PHASE C, LINE INPUT - PHASE B, LINE INPUT ~ PHASE A, LINE INPUT — Note: > LINE INPUTS: 120 A MAX PER TERMINAL Use 75° C copper conductors only. ue terminals to 44 in-lbs. , yTorq THREE PHASE. 12Q/20BVAC. 4W PHASE A -PHASE 0 -PHASE C - CONTROLS DIMMERS 1 AND 4 CONTROLS DIMMERS 2 AND 5 CONTROLS DIMMERS 3 AND 6 FIG. 3 ENC6B and ENC12B Power Distr

heruntergeladen wurde: 3   Dateigröße: 201 kb   Hersteller: AMX  
Kategorie: Andere Home Zubehör
@name

These enclosures contain circuit breakers. TOP VIEW 0.75" (19.05 mm) 6.0" (152.4 mm) SIDE VIEW 24.0" (610 mm) 24.0" (610 mm) These enclosures are CE, UL, and C-UL approved. They include circuit breakers and terminals for multi-phase wiring. They also provide 18 knockouts for 1/2", 3/4", and 1" conduits. RDA-ENC6B Configurations: - ENC6B/120 20 A Breakers - ENC6B/240 10 A Breakers RDA-ENC12B Configurations: - ENC12B/120 20 A Breakers - ENC12B/240 10 A Breakers RDK Configurations:

heruntergeladen wurde: 1   Dateigröße: 201 kb   Hersteller: AMX  
Kategorie: Andere Home Zubehör
@name

(7.48 kg) • RDA-ENC12B: 17.5 lbs. (7.94 kg) Dimensions between center lines (from FIG. 2): RDA-ENC6B: • A to B = 16.0" (406.4 mm) • B to C = 22.88" (581.2 mm) RDA-ENC12B: • A to B = 16.0" (406.4 mm) • B to C = 22.88" (581.2 mm) Radia enclosures must be mounted on a vertical surface with a minimum of 12" (304.8 mm) clearance above and below the enclosure. Configuration for right and left mounting brackets for all Radia enclosures. à .A to B Top slot Maximum mounting screw size: #12

heruntergeladen wurde: 8   Dateigröße: 236 kb   Hersteller: AMX  
Kategorie: Andere Home Zubehör
@name

The Rough-In Box allows the panel to be mounted directly to the studs/ pre-wall and includes a wall box and mounting screws. Wall Mount panels (NXDs) are contained within a metallic outer housing (back box). This back box is not removed when installing the NXD into a Rough-In Box. The back box is only removed to gain access for the replacement of the Compact Flash component or upgrade to the VESA housing. Specifications CB-TP5 (FG038-10) Specifications Dimensions (HWD) • 3 3/4” x 5 1/4” x 3





Kategorien