Working Position: Any Safe position. Motor Speed: 6 rpm. Duty Cycle: 10 min. on, 10 min. off. HALOGEN LAMP WARNING! ~\ This fixture is fitted with halogen j lamps which are highly suscepti- | ble to damage if impro p e r l y i handled. Never touch lamp with I bare fingers as the oil from your j hands will shorten lamp life. Also, | never move fixture until lamp I has had ample time to cool. j Remem b e r, lamps are not cov- | ered under warranty conditions. i INSTALLATION: After pl

For your convenience this lighting effect has been lamped and is ready to be used, there is no assembly required. Please read the following instructions before installing or using your new unit. Operating Instructions: The Quatro II™ is a gobo-spot chase projector, and is sound active. Lights will react to the beat of the music. It has an adjustment knob to adjusts sound activation sensitivity, Sold with 4 standard gobos. To focus the image; loosen the nob on the lens case and pull the lens t

Never touch lampj iwith bare fingers as the oil from your| lhands will shorten lamp life. Also, neverl !move fixture until lamp has had ample1 ¡time to cool. Remember, lamps are notj icovered under warranty conditions. | Thank you for purchasing this American DJ® product. For your convenience this lighting effect has been lamped and is ready to be used, there is no assembly required. Please read the following instructions before installing or using your new unit. Operating Instructions: Unit

Never touch lamp with bare fingers as the oil from your hands will shorten lamp life. Also, never move fixture until lamp has had ample time to cool. Remember, lamps are not covered under warranty conditions. Caution! Always disconnect from main power before replacing lamps or servicing unit. Remember to always replace with same lamps and fuses. Model: Sapphire 4™ SPECIFICATIONS: Lamp: 300W 120V 64514 lamp Power: 110V/60Hz Colors: Multiple Dichroic Optics: High Quality Glass Lens Reflect

Never touch lampj iwith bare fingers as the oil from your| lhands will shorten lamp life. Also, neverl ■move fixture until lamp has had ample1 ¡time to cool. Remember, lamps are notj icovered under warranty conditions. | C a ut i o n ! Always disconnect from main power before replacing lamps or servicing unit. Remember to always replace with same lamps and fuses. Thank you for purchasing this Amer/can DJ® product. For your convenience this lighting effect has been lamped and is ready to be use

Never touch lamp iwith bare fingers as the oil from your lhands will shorten lamp life. Also, never •move fixture until lamp has had ample ¡time to cool. Remember, lamps are not icovered under warranty conditions. C a ut i o n ! Always disconnect from main power before replacing lamps or servicing unit. Remember to always replace with same lamps and fuses. Model: Multi-Star™ SPECIFICATIONS: Lamp: 5 x ZB-FCS 24V 150W Dimensions: 21" x 21" x 18.5" Weight: 20 lbs. Supply Voltage: 120V Fuse:

Never touch lamp iwith bare fingers as the oil from your lhands will shorten lamp life. Also, never •move fixture until lamp has had ample ¡time to cool. Remember, lamps are not icovered under warranty conditions. C a ut i o n ! Always disconnect from main power before replacing lamps or servicing unit. Remember to always replace with same lamps and fuses. Model: SPACE BALLS™ SPECIFICATIONS: Lamp: 2 x ZB-64514 120V 300W, Dimensions: 21.5" x 12" x 11" Weight: 11 lbs. Supply Voltage: 120V Fu

General Functions (REAR): A. POWER INPUT: AC 120V/60Hz, 16A B. CIRCUIT BREAKER: 16A C. POWER INDICATOR: Lights when power is ON D. DMX DIP SWITCH SETTINGS: By assigning dip switch 10 to ON, unit goes to “DMX Pack Mode”. Follow DMX addressing printed on the rear of this Instruction Manual for desired speed and dimming settings. By assigning dip switch 10 to OFF, unit goes to “DMX Self-test Mode”. Follow “Self-test” settings printed on rear to select desired chase. E. DMX INDICATOR: Indicate

90058 Sparkle™ Introduction Introduction: Thank you for purchasing the Sparkle™ by American DJ®. For your convenience the Sparkle™ has been lamped and tested before being shipped to you. The unit is ready to be used, there is no assembly required. Please read the following instructions before attempting installation or using your new Sparkle™. Customer Support: American DJ® provides a toll free customer support line, to provide set up help and to answer any question should you encounter pro

ON/ 5 min. OFF Congratulations on your purchase of this high quality American DJ® product. For your convenience the S-150/DMX has been lamped and is ready to be used. Please read the following instructions before installing or using your new S-150/DMX. Thank you for purchasing the S-150/DMX by American DJ®. CONTROLS & FUNCTIONS (REAR): 1. POWER INPUT: AC 120V-60Hz, 10A 2. FUSE: F10A250V 3. POWER SWITCH: Press down to turn the power on. 4. POWER INDICATOR: Indicates when power is on. 1 pr