Stimmen - , Durchschnittliche Bewertung:
(
)
)
Hersteller: Fisher-Price
Dateigröße: 86.61 kb
Dateiname: 79514.pdf
Unterrichtssprache:
Das Dokument wird geladen, bitte warten
 |
Das Dokument wird geladen, bitte warten
Anleitung Zusammenfassung
Make sure that tin* threaded si^Jt* oí' the 11 nut is on the inside of (ho chair seat. i .-nut Not« h Table Assembly Chair Assembly Long Fnd of Chair I. С hair Seat — Align the two holes on the ( hair leg with tin' mo holes on die chair seal and the hole on the long end of die chatr leg with die hole in the n- nut. Insert a /1" screw through each hole in the chair leg «nul into ihe chair soat and tighten with a Phillips screwdriver. Do not over-fight en. Insert a I /s" screw through the hoh- in die long end of the c hair log anti into die 11-nut and dghten with a Phillips screwdriver. Do not over tighten. Repeat this procedure to aunt h the other chair leg to the chair seat, Table Top • Turn dir table top upside down on a Hat surface. • Insert ten screws into the holes in the table top, as shown. Please Note: There are two screws in each corner of the table to which are already in place. Chair Rack / Table Leg Table Top Turn the chair upright. Insert the four plastic pins in the chair hack into the holes in the back legs. • Align the hole on a table leg with a locking pin lit the table top and insert the leg into the table top, «? • Insert a wedge next to the table leg, as shown. <9 Please Note'. Push the wedge down so that it is Slush with the surface of the table top. This may require light «appjng. • Insert a ' screw, as shown, and tighten with a Phillips screwdriver Do not over-tighten. • Re|)eat this procedure to attach the other three table legs to the (able (op. One-time assembly is now complete. Chair Bark Cover Chair Back • Align the holes on the < hair back cover with (he plastic pins in the chair hack. • Insert a Vi" strew into each ot the live holes and tighten with a Phillips screwdriver. Do not over tighten. One-time assembly is now complete. Chair I Plasric Ribs Cleaning - • Attach a foot to <1 < hair leg sí) that the plastic ribs rest on the floor. • Insert eme v ' screw. a.s shown, and tighten with a Phillips -.i rewdriver. Do not over-tighten. • Repeat this procedure to attach a foot to each of the other chair legs. The lable and (.hairs Set tan he cleaned with warm, soapv water or mild household cleaning agent v i Lirsh or abrasive cleaners should not be used. In Crral Britain. *t • ■!<-«.su,'. • •. - ■'-!% : ........ •-/ <•' i'-o; in Australia. 1 - ■ -i -• -'Г . . ; - t ¡ . - : : ! . i ■’> • i НЙ16 Hshci Pritc. inc.. Last Atiruni, Ww York bf0f)2 /‘15 1 -j i 705 i I (Ш0...