Stimmen - 4, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: AeroGarden Dateigröße: 903.37 kb Dateiname: 3faab18a-7de4-4eaa-ae9d-63f3ee33d343.pdf Unterrichtssprache:

To reduce the risk of electric shock, the AeroGarden has a specific plug. Do not change the plug in any way. DANGER– to reduce risk of electric shock: 2. Always unplug AeroGarden from electrical outlet before cleaning or changing Grow Bulbs (light bulbs). WARNING– to reduce risk of burns, fire, electric shock, or injury to persons: 3. Unplug AeroGarden from outlet before putting on or taking off parts. 4. Close supervision is necessary when AeroGarden is used by or near children, invalids, or disabled persons. 5. Use AeroGarden only for its intended use as described in instructions. Do not use attachments not recommended by manufacturer. 6. Never operate AeroGarden if it has a damaged cord or plug, if it is not working properly, if it has been dropped and damaged, or if it has been dropped in water. If any of these conditions occur/exist, contact or your country’s local distributor for instructions. 7. Keep cord away from heated surfaces. 8. Never operate furnishing with air openings blocked. Keep air openings free of lint, hair, and the like. 9. Never drop or insert any object into any electrical openings. 10. Do not use outdoors. 11. Do not operate where aerosol (spray) products are being used or where oxygen is being administered. 12. Do not touch moving parts or hot parts such as pumps, bulbs, reflective surfaces, and the like. 13. To disconnect, remove plug from outlet. 14. Do not place or submerse base, cord, plug, or lamp hood in water or other liquid to clean it. 15. Do not allow water to contact hot light bulbs. 16. Use only approved and supplied parts and accessories. Use only lamp model 100340 (N. America) or 200340 (Europe & Australia) Grow Bulbs with this AeroGarden model. Use of any other kind of accessory is not recommended. Replacement parts can be ordered from or from your retailer. 17. Do not use AeroGarden for other than intended purpose. 18. This product is intended for household and residential use only. This product is not approved for commercial applications. 19. Read and follow all important notices on the AeroGarden and in the accompanying literature. 20. If supply cord is damaged, it must be replaced by manufacturer, its service agent, or similarly qualified technician in order to avoid a hazard. 21. Electrical wiring must be in accordance with local regulations. 22. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of appliance by a person responsible for their safety. 23. Children should be supervised to ensure they do not play with the appliance. SAvE THESE INSTRUCTIONS B Insert Lamp Arm into Base Push straight in. Instructions continued on next Page Plug Lamp Cord into Lamp Hood D Insert Grow Bulbs into Lamp Hood C Lamp Cord Lamp Hood (bottom view) DO NOT TWIST BULBS! remember to replace Grow Bulbs every 6 months. Push Lamp Cord firmly into socket in Lamp Hood. Push Lamp Arm down until you hear a “click.” Lamp Arm (back view) Base (back view) Base (front view) Lamp Hood (front view) Bowl (front view) Deluxe B Grow Bulbs (2) Seed Kit Lamp Arm (back view) Unpack Your AeroGarden6A Quick Start Assembly (No tools required) 1 B Insert Lamp Arm into Base Push straight in. Instructions continued on next Page Plug Lamp Cord into Lamp Hood D Insert Grow Bulbs into Lamp Hood C Lamp Cord Lamp Hood (bottom view) DO NOT TWIST BULBS! remember to replace Grow Bulbs every 6 months. Push Lamp Cord firmly into socket in Lamp Hood. Push Lamp Arm down until you hear a “click.” Lamp Arm (back view) Base (back view) Base (front view) Lamp Hood (front view) Bowl (front view) Deluxe B Grow Bulbs (2) Seed Kit Lamp Arm (back view) Unpack Your AeroGarden6A Quick Start Assembly (No tools required) 1 2 1 Quick Start Assembly (continued) Check to be sure that Bowl is securely seated on Air coupling in Base. Place Lamp Hood on Lamp Arm E Center hands over Lamp Arm and push Lamp Hood down until you hear a “click.” (back view) Set Bowl into Base F (front view) Air Coupling 1 Quick Start Assembly (continued) Check to be sure that Bowl is securely seated on Air coupling in Base. Place Lamp Hood on Lamp Arm E Center hands over Lamp Arm and push Lamp Hood down until you hear a “click.” (back view) Set Bowl into Base F (front view) Air Coupling 3 Use one hand to grasp Lamp Arm. Gently slide AeroGarden toward the surface edge and place other hand under Base. Moving Your AeroGarden6G Away From Reach of children and pets Direct sources of heat (e.g., stove, furnace vents) Direct sources of cold air (e.g., window drafts, A/C vents) For Optimal Tending & Harvesting, Also Consider Easy access to un-softened water note: do not place beneath under-cabinet lights. Near: A standard electrical outlet, per local regulations Under: A space that allows 22” (56cm) clearance for the full height of rai...

Herunterladen

Geben Sie zwei Ziffern: