Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
GARDEN ACCENT LIGHTS LEGACY™ & HAMPTON™ OWNER’S MANUAL ASSEMBLY AND OPERATING INSTRUCTIONS HOW YOUR LEGACY™ & HAMPTON™ SOLAR-POWERED L.E.D. LIGHTS WORK READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING YOUR SOLAR LIGHT. SAVE THIS MANUAL FOR FUTURE REFERENCE. IMPORTANT: The EPA Certified RBRC® Battery Recycling Seal on the nickel-cadmium (Ni-Cd) battery contained in our product indicates The Brinkmann Corporation is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful life, when taken out of service in the United States or Canada. The RBRC® program provides a convenient alternative to placing used Ni-Cd batteries into the trash or the municipal waste stream, which may be illegal in your area. Please call 1-800-8-BATTERY™ for information on Ni-Cd battery recycling and disposal bans/restrictions in your area. The Brinkmann Corporation’s involvement in this program is part of our commitment to preserving our environment and conserving our natural resources. During the day, the solar panel converts sunlight into electricity and recharges the battery. At night, the light turns on automatically using the electricity stored during that day. The number of hours the light will stay on is dependent on your geographical location, weather conditions and seasonal lighting availability. Solar lights do not receive as much direct sunlight in winter months. Therefore, the number of hours the light will stay on will be reduced during winter. OR Legacy Hampton BEFORE FIRST USE – Pull out to remove the clear plastic strip with orange sticker in the light fixture to charge battery. Install your Legacy or Hampton solar lights in direct sunlight and charge for 1012 FULL, SUNNY DAYS. The lights will turn on automatically at night. Allow at least 10-12 cycles (i.e., 10-12 days and nights of charging and discharging) for the battery to charge to its full capacity. The rechargeable Ni-Cd battery must be allowed to fully charge to operate properly. Partially charging the batteries on a consistent basis will drastically reduce the life of the batteries. ASSEMBLY INSTRUCTIONS Inspect contents of the box to ensure all parts are included and undamaged. 1 2 3 1 Legacy Light Fixture Hampton Light Fixture Legacy Light Fixture OR Hampton Light Fixture 3-Piece Hanging Hook Ground Stake PARTS LIST: 1 2 3 Select a location with full, direct sunlight. Shady locations will not allow the battery to charge fully and will reduce the hours of nighttime light. NOTE: The rechargeable Ni-Cd battery must be allowed to fully charge to operate properly. Partially charging the battery on a consistent basis will drastically reduce the life of the battery. The selected location should not be near a nighttime light source such as a porch light or street light, as these might keep the solar lights from automatically turning on. The solar lights should not be placed closer than 5 feet from one another. This could cause the solar lights to flicker from the adjacent light source. OPERATING INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING YOUR SOLAR LIGHT. SAVE THIS MANUAL FOR FUTURE REFERENCE. Step 1 To form a hanger for the solar light, connect the hook section with one or two stand sections, depending on the height desired. Step 2 Locate an area of solid ground where you can place your solar lights and insert ground stake. Step or press down on ground stake to aid in driving stake into ground. Make sure ground stake is inserted all the way into ground. NOTE: Ground can be softened by soaking area with water first. Step 3 Once ground stake is firmly in place, insert hanging hook into center hole of ground stake. Step 4 Hang light fixture from hanging hook. The photocell light sensor should point away from other nighttime light sources. Step 5 Charge in direct sunlight for 10-12 FULL, SUNNY DAYS. The light will turn on automatically at night. Allow at least 10-12 cycles (i.e., 10-12 days and nights of charging and discharging) for the battery to charge to its full capacity. Ground Stake Hook Section Hanging Hook Ground Stake Stand Sections IMPORTANT: The EPA Certified RBRC® Battery Recycling Seal on the nickel-cadmium (Ni-Cd) battery contained in our product indicates The Brinkmann Corporation is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful life, when taken out of service in the United States or Canada. The RBRC® program provides a convenient alternative to placing used Ni-Cd batteries into the trash or the municipal waste stream, which may be illegal in your area. Please call 1-800-8-BATTERY™ for information on Ni-Cd battery recycling and disposal bans/restrictions in your area. The Brinkmann Corporation’s involvement in this program is part of our commitment to preserving our environment and conserving our natural resources. Top Housing Battery Compartment Lid Lens Top Housing Hanger Top Housing Batt...