Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
WCO200C Accessories/Parts (USA/Canada) Accessoires/Pieces (E.-U./Canada) 1-800-738-0245 IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: . Read all instructions. . To protect against risk of electrical shock do not immerse cord, plugs or appliance in water or other liquid. . Close supervision is necessary when any appliance is used by or near children. . Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning. . Avoid contacting moving parts. . Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment. Or, call the appropriate toll-free number on the cover of this manual. . The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock or injury. . Do not use outdoors. . Do not let cord hang over edge of table or counter. . Do not let cord contact hot surface, including the stove. . Do not open pressurized (aerosol-type) cans. . Do not open cans of flammable liquids such as lighter fluids. SAVE THESE INSTRUCTIONS. This product is for household use only. 1 POLARIZED PLUG (120V Models Only) This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way. TAMPER-RESISTANT SCREW Warning: This appliance is equipped with a tamper-resistant screw to prevent removal of the outer cover. To reduce the risk of fire or electric shock, do not attempt to remove the outer cover. There are no user- serviceable parts inside. Repair should be done only by authorized service personnel. ELECTRICAL CORD a) A short power-supply cord (or detachable power-supply cord) is to be provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord. b) Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use. c) If a long detachable power-supply cord or extension cord is used, 1) The marked electrical rating of the detachable power-supply cord or extension cord should be at least as great as the electrical rating of the appliance, 2) If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord, and 3) The longer cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over. Note: If the power supply cord is damaged, it should be replaced by qualified personnel. In Latin America, by an authorized service center. 2 Product may vary slightly from what is illustrated. . . . . A † 1. Removable cutting assembly (part # WC0200C-01) 2. Geared wheel 3. Guide bar 4. Lever † Consumer replaceable/removable parts 3 How to Use This product is for household use only. Note: See CARE AND CLEANING for assembly instructions. 1. Remove all packaging materials before using. 2. Place the can opener on a level surface and plug into 120 V~ 60 Hz electrical outlet. 3. Hold can approximately level. 4. Raising lever, place can under guide bar and against geared wheel. 5. Press down on lever to pierce lid of can. This also starts the cutting action. Let go of lever and the can will stop automatically when opened. 6. Grasp the can; then, raise the lever up from the can. 7. Slide the lid away from the magnet. Use caution to avoid injury from sharp edge of lid. HINT FOR USING THE CAN OPENER • To open extra tall cans, place can opener at edge of counter before wedging can in position for opening. Important: Do not use the can opener for more than 5 minutes at a time. Allow to cool for at least 15 minutes before using. This will prevent motor burnout due to overheating. 4 Care and Cleaning This product contains no user serviceable parts. Refer service to qualified service personnel. Note: Unplug the unit from electrical outlet before cleaning. 1. To remove lever, hold the can opener facing you. Lift the lever upward to the highest position and push the lever to the right. 2. Wash lever in warm, soapy water and wipe the outside surfaces of the unit with a damp cloth. 3. To replace the lever, hold the can opener facing you with the lever in the lifted position and slide the pivot into the pivot hole. Push the lever to the left until it snaps into place (B and C). Lower the lever back onto the top of the can opener. 4. Store cord in cord storage (D). Important: Cutting blade is sharp, use caution. D C B 5 IMPORTANTES MISES EN GARDE Lorsqu’on utilise un appareil electrique, il faut toujours respecter certaines regles de securite fondamentales, ...