Login:
Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Anleitung Waterpik Technologies, modell Total Body Showerhead AquaScape

Hersteller: Waterpik Technologies
Dateigröße: 325.95 kb
Dateiname: a2b475b4-01ad-44e1-b10f-c28480a735b0.pdf
Unterrichtssprache:enesfr
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


Clean pipe threads thoroughly. Hand tighten pivot ball to pipe. To align unit to shower pipe, loosen nut, reposition shower head. Re-tighten nut. Limited Lifetime Warranty Water Pik, Inc. warrants to the original purchaser of this product that it is free from defects in material and workmanship for as long as the original purchaser owns this product. Water Pik, Inc. will at our election, repair or replace any part of the product which in our opinion is defective, provided that the product has not been abused, misused, altered or damaged after purchase. (This includes damage due to use of tools or harsh chemicals.) In the event an item has been discontinued we will replace with what we deem to be the closest product. Water Pik, Inc. is not responsible for labor charges, installation, or other consequential cost. The responsibility of Water Pik, Inc. shall not exceed the original purchase price of the product. This warranty gives you specific legal rights. Save your receipt as proof of purchase is required for warranty action. Register your product at Francais Reglage du debit Les pommes de douche Waterpik® sont equipees d’un regulateur OptiFLOW® qui limite le debit d’eau maximal a 2,5 gallons par minute a 80 lb/po_, conformement aux exigences de la loi federale americaine. Dans les regions ou la pression de l’eau est tres faible, causant un debit d’eau mediocre dans la pomme de douche, il est possible de retirer le regulateur afin d’augmenter le debit d’eau. Pour retirer le regulateur, devisser la grille du filtre en la tournant dans le sens horaire. Oter le regulateur avec une pince a bec effile et reinstaller la grille du filtre. Waterpik® AquaScape™ Total Body Showerhead Pomme de douche Waterpik® AquaScape™ - Aspersion totale Cabezal de ducha Waterpik® AquaScape™ Cubre todo el cuerpo Pipe joint regulateur de debit Pivot Ball Nut Operation The 9” AquaScape™ Total Body Shower has two spray settings, as opposed to the one spray setting on the 6” model. To change settings from either the full-body spray or the concentrated power spray, push the spray change button on the back of the showerhead so it extends to the opposite side of its current position. You can change the orientation of your showerhead by loosening nut and repositioning shower head; re-tighten nut. This allows for higher, lower or wider spray coverage. Care and Cleaning • Remove showerhead from pipe. Then, remove filter screen with pliers by turning counterclockwise. Clean filter screen at least once a year, or whenever you notice a drop in water pressure. After cleaning, reinsert the filter screen and ensure that the washer is in place before reinstalling the showerhead. • Cleaning is required when mineral deposits appear on the spray orifices to maintain proper working conditions. Clean by soaking in household vinegar. • Do not clean or rinse any part with harsh chemicals, heavy duty cleaners, or abrasives; this may damage parts or finish and may void warranty. tamis de filtration articulation spherique Instruction Manual Manuel d’instructions Manual de Instrucciones ecrou Installation Aucun outillage n’est necessaire. Enlever la vieille pomme de douche. Nettoyer parfaitement le filetage du tuyau. Visser a la main l’articulation spherique sur le tuyau. Pour aligner l’unite avec le conduit de douche, desserrer l’ecrou et repositionner la pomme de douche. Resserrer l’ecrou. Flow Control Waterpik® showerheads are equipped with an OptiFLOW® regulator that limits maximum water flow to 2.5 gallons per minute at 80 psi as mandated by U.S. federal law. In areas with extremely low water pressure, causing the shower water flow to be unsatisfactory, the flow regulator may be removed to improve the water flow in the showerhead. To remove, unscrew filter screen by turning counterclockwise. Remove regulator with needle-nose pliers and replace filter screen. Have any questions or need assistance? Go to and click on Showerheads and click on the Ask Ann! link. In the U.S., call our toll-free Customer Assistance Line, 1-800-525-2774 In Canada, call our toll-free Customer Assistance Line, 1-888-226-3042 Patents pending. If product malfunctions or becomes damaged, stop use and contact Water Pik, Inc. for replacement and/or repair. Waterpik®, Waterpik® (stylized) and OptiFLOW® are registered trademarks of Water Pik, Inc. AquaScape™ is a trademark of Water Pik, Inc. ©2006 Water Pik, Inc. US Office: 1730 East Prospect Road Fort Collins, CO 80553-0001 U.S.A. Form No. 20008990-F AC Designed in U.S.A. Made in China. Outside the U.S. write us at: Water Pik, Inc. 1730 East Prospect Road Fort Collins, CO U.S.A. 80553-0001 Spray change button tuyau Washer Flow Regulator articulation spherique Filter Screen ecrou Pivot Ball Nut Utilisation/fonctionnement La pomme de douche AquaScapeTM Aspersion totale 9 po pour corps entier offre deux reglages d’aspersion (une seule position de reglage pour le modele de 6...


Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien