Stimmen - 3, Durchschnittliche Bewertung: 4.7 ( )

Hersteller: Kohler Dateigröße: 98.74 kb Dateiname: 3a22d143-4812-471d-9f1d-59182b1c9af3.pdf Unterrichtssprache:

Fotos und technische Daten  Kohler  VINTAGE K-700

ORDERING INFORMATION B. PRODUCT INFORMATION Accessories/hardware: Drain for drop-in K-7158 recommended Drain for free-standing K-7159 recommended Adjustable legs K-1172 optional Fixture*: basin area top area weight Bathing well 44” (111.8cm) x 24” (61cm) 60” (152.4cm) x 32” (81.3cm) 485 lbs. (220kg) water depth capacity Overflow 15” (38.1cm) 82 gals. (310L) * Approximate measurements for comparison only. Included Components: Cutout template 106594-7 C. INSTALLATION NOTES Read the entire installation instruction before beginning the installation. NOTICE: The floor must support 2,000 lbs (907kg). This is the combined weight of the bath, water, and two bathers. Pre-plan access for moving the bath into the construction area; the bath is heavy and will not fit easily through door- 3” (7.6cm) 110050-2-AB 2. ROUGHING-IN: K-700 VINTAGE FREE STANDING BATH WITH FITTINGS A. ORDERING INFORMATION B. PRODUCT INFORMATION Accessories/hardware: Drain K-7159 required* Antique faucet K-104 required* Adjustable legs K-1172 required* Riser tubes K-128 required* Brass brackets/end caps K-708 required* Wood base Ceramic floor rail K-705 K-709 required* required* Wood towel bar K-707 required* * Required for configuration illustrated. Fixture*: basin area top area weight Bathing well 44” (111.8cm) x 24” (61cm) 60” (152.4cm) x 32” (81.3cm) 485 lbs. (220kg) water depth capacity To overflow 15” (38.1cm) 82 gals. (310L) * Approximate measurements for comparison only. Included Components: Cutout template 106594-7 C. INSTALLATION NOTES Read the entire installation instruction before beginning the installation. NOTICE: The floor must support 2,000 lbs (907kg). This is the combined weight of the bath, water, and two bathers. Pre-plan access for moving the bath into the construction area; the bath is heavy and will not fit easily through doorways. Roughing-In Notes Fixture dimensions are nominal and conform to tolerances in ANSI Standard A112.19.1. No change in measurements if connected with drain illustrated. 77” (195.6cm) x 47” (119.4cm) WOOD TOWEL BAR 42” (106.7cm) \ >- ■,-C S / ! 1 / ,1 ~—"h --4 1—// 4--X/ T1 18-1/4” (46.4cm) 1-1/8” (2.9cm) s 36” (91.4cm) 2-3/8 4” (6cm) (10.2cm) T \ (4” 10.2cm) 72” (182.9cm) 28-1/4” (71.8cm) 1-1/2” I.P.S. THR'D. 1-1/2” O.D. Mfl -;—2-3/8”' T~4” (10.2cm) / (6cm) 2-3/4” (7cm) 24” (61cm) 32” (81.3cm) WOOD BASE/CERAMIC FLOOR RAIL 51-3/8” (130.5cm) WOOD BASE/CERAMIC FLOOR RAIL Kohler Co., Kohler WI U.S.A. 2 110050-2-AB 3. PRODUCT REQUIREMENTS A. SUMMARY OF KEY REQUIREMENTS B. PRODUCT INSPECTION • Observe all local plumbing and building codes. • Install the unit level with the subfloor. • Provide properly-dimensioned framing. Carefully unpack the whirlpool, remove the protective tape, and inspect the unit for damage. Leave all materials in the carton during construction to prevent damage. • Make sure the drain location corresponds to the b...

Herunterladen

Geben Sie zwei Ziffern: