Stimmen - 5, Durchschnittliche Bewertung: 4 ( )

Hersteller: Hampton Direct Dateigröße: 4.07 mb Dateiname: 2a945bca-ab4a-4481-b32e-5dfb91dd5338.pdf Unterrichtssprache:

For assistance or additional information consult an authorized installer, service agency or the gas supplier. FOR YOUR SAFETY What to do if you smell gas: Do not try to light any appliance Do not touch any electrical switch: do not use any phone in your building. Immediately call your gas supplier from a neighbour's phone. Follow the gas supplier's instructions. If you cannot reach your gas supplier, call the fire department. FOR YOUR SAFETY Do not store or use gasoline or other flammable vapours and liquids in the vicinity of this or any other appliance. Installation and service must be performed by an authorized installer, service agency or the gas supplier. Tested by: Installer: Please complete the details on the back cover and leave this manual with the homeowner. Homeowner: Please keep these instructions for future reference. 918-011a FPI FIREPLACE PRODUCTS INTERNATIONAL LTD. 6988 Venture St., Delta, BC Canada, V4G 1H4 FPI GAS INSERT TO THE NEW OWNER Congratulations! You are the owner of a state-of-the-art Gas Insert by FPI. The FPI Gas Insert Series of hand crafted appliances has been designed to provide you with all the warmth and charm of a fireplace, at the flick of a switch. The models U32-NG2 and U32-LP2 of this series have been approved by Warnock Hersey for both safety and efficiency. As it also bears our own mark, it promises to provide you with economy, comfort and security for many trouble free years to follow. Please take a moment now to acquaint yourself with these instructions and the many features of your FPI Fireplace. Note: Oversize faceplate is 44" x 28" INFORMATION FOR MOBILE/MANUFACTURED HOMES AFTER FIRST SALE This FPI product has been tested and listed by Warnock Hersey as a Direct Vent Wall Furnace to the following standards: CAN/ CGA-2.17-M91, and ANSI Z21.88-1998/CSA 2.33-M98. This Direct Vent System Appliance must be installed in accordance with the manufacturer's installation instructions and the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280, or the current Standard of Fire Safety Criteria for Manufactured Home Installations, Sites, and Communities ANSI/NFPA 501A, and with CAN/CSA Z240-MH Mobile Home Standard in Canada. See page 6 for additional requirements. This appliance installation must comply with the manufacturer's installation instructions and local codes, if any. In the absence of local codes follow the current National Fuel Gas Code, ANSI Z223.1 and the current National Electrical Code ANSI/NFPA 70 in the U.S.A., and the current CAN/CGA B149 Gas Installation Code and the current Canadian Electrical Code CSA C22.1 in Canada. This FPI Mobile/Manufactured Home Listed appliance comes factory equipped with a means to secure the unit. This FPI Mobile/Manufactured Home listed appliance comes equipped with a dedicated #8 ground lug to which an 18 gauge copper wire from the steel chassis ground must be attached. U32-2 FPI Direct Vent Gas Insert TABLE OF CONTENTS FPI GAS INSERT Unit Dimensions ................................................................... 2 Safety Label ......................................................................... 4 Installation For Your Safety ...................................................................... 5 Specifications ........................................................................ 5 Gas Pressure Testing ........................................................... 5 Installation into a Solid Fuel Burning Fireplace or Factory Built Fireplace .................................................... 5 General Safety Information.................................................... 5 Installation Checklist ............................................................. 5 Manufactured Mobile Home Additional Requirements ........ 6 Materials Required ................................................................ 6 Minimum Fireplace Clearances ........................................... 6 Clearances to Combustibles ................................................ 6 Gas Connection .................................................................... 7 Venting ......................................................................... 7 - Flue Liner Installation .................................................. 7 Gas Pressure Test ................................................................ 8 Gas Insert Aeration System .................................................. 8 Optional Brick Panel .............................................................. 8 Log Installation ...................................................................... 9 Faceplate & Trim ................................................................. 10 Standard Flush Door ........................................................... 11 Optional Flush Trim ............................................................. 11 Optional Door Fire Screen .................................................. 11 Flush Louvers .........................

Herunterladen

Geben Sie zwei Ziffern: