Stimmen - 5, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
ft. heaped capacity • Durable, polyethelene body • Easy dump If you read and follow these instructions, this product can be assembled in 55 minutes or less. If you don't read these instructions, assembly may take over two hourst TO MINIMIZE ASSEMBLY TIME: DO NOT tighten fasteners until instructed to do so. Illustrated items shaded red are the parts being assembled in that instruction section. Assemble unit on cardboard box to avoid scratches or damage to parts. For best results, two people are required for assembly. If there are any missing parts, or if you have any questions on assembly, operation, maintenance or safety, please call 1-800-652-2321 All fasteners are readily available for purchase at your nearest Sears store or local hardware store. Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A Visit our Craftsman website: @ 01/2009 6000154-REV A 01/09 Bolt Bag Contents I© 15 17 REF. NO. PART NO. 13 300083 14 300084 15 300072 16 6000105 17 6000106 13 16 AMT. DESCRIPTION 1 HITCH PIN 3 HAIRPIN COTTER PIN 4 3/4" AXLE WASHER 2 SPACER, LONG 2 SPACER, SHORT 18 1920 21 REF. NO. PART NO. AMT. DESCRIPTION 18 300054 32 5/16"-18 x 3/4" PAN HEAD BQL-r 19 3000711 12 5/16" USS FLAT WASHER 20 300062 34 5/16"-18 KEPS NUT 21 3000537 2 5/16"-18 x 1" PAN HEAD BOLT TOOLS SUGGESTED FOR ASSEMBLY Large blade screwdriver 1/2" wrench and/or socket cordless drill SAFETY INSTRUCTIONS Never exceed load capacity of cart -325 Ibs. When operating on slopes, use lowest ground speed and limit load to 200 Ibs. Do not carry passengers in cart. Do not use this cart on public roads. Operate up and down slopes, never across the face of slopes. Avoid sudden turns or maneuvers. MAINTENANCE & STORAGE Periodically check all nuts and bolts for tightness. Check tire pressure regularly. Grease wheels at axle for longer life. Keep cart clean and dry to prevent rust and corrosion. Store inside a clean, dry area when not in use. OPERATION With cart attached to tractor pull back on latch bar. Cart body will tilt backwards, dumping contents. Once empty, pull cart body down until it latches. Make sure to use the hairpin cotter with the hitch pin when attaching to the tractor. Follow all operating instructions in tractors owners manual. FOR MISSING PARTS, Call 1-800-652-2321, Monday -Friday, 8 a.m. -5 p.m.E.S.T. Page 2. Carton Contents 2 6 3 7 10 8 12 4 II 9 REF. NO. PART NO. AMT. REF. NO. PART NO. AMT. i I CA RT BODY i 2 1 FRONT SUPPORT BRACE 8 1 DRAWBAR ASSEMBLY 3 1 FRONT SUPPORT 9 2 WHEELS 4 2 _TCH ANGLE 10 ANGULAR SUPPORT 5 2 AXLE SUPPORT 11 1 ASSEMBLY MANUAL 6 4 AXLE HOLDER 12 6000108 BOLT BAG FOR MISSING PARTS, Call 1-800-652-2321, Monday -Friday, 8 a.m. -5 p.m.E.S.T. Page 3. Front Support Sub-Assembly Step 1. Attach LATCH ANGLE (4) to FRONT SUPPORT (3). Step 2. Assemble FRONT SUPPORT BRACE (2) to FRONT SUPPORT (3). FOR MISSING PARTS, Call 1-800-652-2321, Monday -Friday, 8 a.m. -5 p.m.E.S.T. Page 4. Axle Support Sub-Assembly Step 3. Loosely bolt together two AXLE HOLDERS (6) as shown. Bolts will be tightened after axle is installed. Step 4. Repeat for other two plates. 2O Finger tight at this time 6 18 FOR MISSING PARTS, Call 1-800-652-2321, Monday -Friday, 8 a.m. -5 p.m.E.S.T. Page 5. Undercarriage Assembly Step 5. Secure Front Support Assembly (Page 4) and AXLE SUPPORTS (5) to CART BODY (1) as shown, making sure to use flat washers (19) under the heads of ALL bolts (18 & 21) going through CART BODY (1). NOTE: HolesA&B need bolt (21) Finger tight at this time 5 FRONT SUPPORT ASSEMBLY _18 21 2O USE FLA T WASHERS UNDER THE HEADS OF THE BOLTS GOING THROUGH THE BODY. FOR MISSING PARTS, Call 1-800-652-2321, Monday -Friday, 8 a.m. -5 p.m.E.S.T. Page 6. Axle Step 6. Holder Add AXLE Assembly HOLDER ASSEMBLIES (Page 5) to AXLE SUPPORTS with bolts (18) and keps nuts (20) as shown. HOLDER ASSEMBLY THESE BOLTS WILL TIGHTENED AFTER IS INSTALLED. BE AXLE 8 TIGHTEN THESE BOLTS ONLY AT EIGHT THIS TIME. 2O FOR MISSING PARTS, Call 1-800-652-2321, Monday -Friday, 8 a.m. -5 p.m.E.S.T. Page 7. Hitch Assembly Step 7. Secure LATCH ANGLE (4) to DRAWBAR ASSEMBLY (8) with bolts (18) and kep nuts (20). 8 2O FOR MISSING PARTS, Call 1-800-652-2321, Monday -Friday, 8 a.m. -5 p.m.E.S.T. Page 8. Add Axle, Drawbar & Wheels Step 8. Slide AXLE DRAWBAR (7) through ASSEMBLY AXLE HOLDER, large SPACER (16), (8), large SPACER (16) and other AXLE HOLDER. Step 9. Center all bolts axle and tighten at this time. Step 10. Slide AXLE WASHER small SPACER (17), WHEEL (9), another WASHER (15). (15), AXLE / 5 HOLDER Step 11. Insert in axle. HAIRPIN CO-I-I-ER PINS (14 15 Step 12. Set cart upright on wheels insert HITCH PIN (13) into ASSEMBLY (8) and secure CO-I-I-ER PINS (13). and DRAWBAR with HAIRPIN 9 15 Tighten all bolts at this time FOR MISSING PARTS, Call 1-800-652-2321, Monday -Friday, 8 a.m. -5 p.m.E.S.T. Page 9. Service Parts List-610.24489 REF. PART NO. 1 6000026 2 6000022 6000025 4 6000024 6000028 2 6 6000029 6000030 8A 6000019 9 6000027 10 6000023 13 300083 ...