Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Hersteller: Univex Dateigröße: 409.25 kb Dateiname: Unterrichtssprache:

The EverClean™ antimicrobial system incorporates AlphaSan®, a patented antimicrobial agent manufactured right into the circulation system components, which suppresses the growth of unsightly algae, fungus, mold and mildew. □ Model# 7236L.002 Bathing Pool Only Nominal Dimensions: 72” x 36” x 21-1/4” (1829 x 914 x 540mm) Compliance Certifications - Meets or Exceeds the Following Specifications: • Underwriters Laboratories - Hydromassage Bathtubs UL 1795 • ASME A112.19.7M for Whirlpool Appliances • ANSI Z124.1 for Plastic Bathtubs • ASTM E162 for Flammability • NFPA 258 for Smoke Density Components Required: □ Bath Filler*: (specify finish) □ Bath Drain: 1599.205.XXX (specify color) OR 1599.500.020 (white only) Custom Accessories Available: □ Six Foot Apron: 9271.019.XXX (specify color) □ E-Z-Install™ Whirlpool Heater - EZHEAT-100 □ Tile Bead Kit: TILE-BEAD * See American Standard Faucet Selector For color/finish availability and other faucet choices, please see the Product Selector and Pricing Guide. NOTE: E-Z-Install™ Whirlpool Heater is designed to maintain water temperature during operation. It will not heat cold water to desired bathing temperature. SEE REVERSE FOR ROUGHING-IN DIMENSIONS AND PRODUCT SPECIFICATIONS AlphaSan® is a registered trademark of Milliken & Co. © 2007 American Standard Inc. HD-3 Revised 7/07 Amm'com Standard LIFETIME™ 6’ X 36" WHIRLPOOLS BY AMERICAN STANDARD HIGH GLOSS ACRYLIC OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7. GENERAL SPECIFICATIONS FOR 7236L WHIRLPOOL INSTAIIFD SI7F 72 x 36 x 21-1/2 In (1829 x 914 x 546mm) WEIGHT 106 I bs (48 Kg ) WEIGHT w/WATER 1031 Lbs. (467 Kg.) GAI TO OVERFLOW 111 Gal (420 I ) WHIRLPOOL MIN. OPERATING VOL. 53 Gal (201 I ) RATHING WE! \ AT SUMP 53-1/2 x 26-1/4 In. (1359 x 667mm) RATHING WEL \ AT RIM 64-1/2 x 30 In (1638 x 762mm) WATER DEPTH TO OVERFLOW 18-1/2 In.(470mm) FL OOR \ OADING 57 I bs /Sq Ft (280 Kgs /Sq m) (PROJECTED AREA) WHIRLPOOL ELECTRICAL SPECIFICATIONS PUMP 2.1 HP,14.4 AMPS,120V. NOTES: BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND OR PENINSULA TYPE INSTALLATION. SUMP OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY OTHERS. ■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL, DECK MOUNTED SPOUT AND INTEGRATED BATH FILLER FOR ADDITIONAL INFORMATION. OPTIONAL 3-WALL TILING BEAD KIT No. TILE-BEAD AND APRON No. 6FT-APRON MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS. IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING SYSTEM PIPING, DRAIN OVERFLOW, AND APRON INSTALLATION. MOUNTING HOLES DRILLED BY INSTALLER. IMPORTANT: Dimensions of fixtures are nominal and may vary within the ra...

Herunterladen

Geben Sie zwei Ziffern: