Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Black & Decker Dateigröße: 1.13 mb Dateiname: Unterrichtssprache:

These batteries must not be incinerated or composted. IMPORTANT: DO NOT ATTEMPT TO REMOVE THE PLASTIC COVERING FROM THE BATTERIES. Removal: 1. Remove blade assembly from the unit. (See “Care and Cleaning”). Use a small Phillips screwdriver to remove the screws on the unit and pry the two halves apart. You will see two barrel shaped batteries and connections. If the batteries have leaked or vented, wear protective gloves before touching them. 2. Disconnect negative (-) black wire from one battery by sliding the connection off the battery. Disconnect positive (+) red wire in the same way. Lift the battery pack out. WHY YOU SHOULD RECYCLE YOUR RECHARGEABLE BATTERIES Unlike alkaline batteries that may last only a few weeks, nickel-cadmium (Ni-Cd) batteries can be recharged over and over again. Though Ni-Cd batteries last far longer than alkalines — usually 2 to 3 years — they eventually will no longer hold a charge. When that happens, some consumers throw away the batteries or the product itself which is wasteful and harmful to the environment. To help avoid this, contact your local recycling center for information on dropping off spent batteries. The RBRC™ (Rechargeable Battery Recycling Corporation) Seal on the nickel-cadmium battery (or battery pack) indicates that the costs to recycle the battery (or battery pack) at the end of its useful life have already been paid. In some areas, it is illegal to place spent nickel-cadmium batteries in the trash or municipal solid waste stream and the RBRC™ program provides an environmentally-conscious alternative. RBRC has established programs in the United States to facilitate the collection of spent nickel-cadmium batteries. Help protect our environment and conserve natural resources by bringing the spent nickel-cadmium battery to your participating local retailer for recycling. You may also contact your local recycling center for information on dropping off spent batteries in your town. RECYCLE 1.800.822.8837 Product may vary slightly from what is illustrated. Este producto puede variar ligeramente del que aparece ilustrado. Le produit peut differer legerement de celui illustre. 1. Unit release lever †2. Blade assembly with operating lever (Part#177046-00) 3. Lid release 4. Locating tab 5. Mounting base (GC200 series) †6. Mounting hardware kit (not shown) (GC200 series) (Part# 177451-00) †7. AC adapter (not shown) (Part #GC100-01) † Consumer replaceable 1. Palanca para desenganchar la unidad †2. Ensamble de la cuchilla con palanca de operacion (Part#177046-00) 3. Expulsor de tapas 4. Guia 5. Base de montaje (serie GC200) †6. Juego de piezas de montaje (no se muestra) (serie GC200) (Part #177451-00) †7. Adaptador de CA (no se muestra) (Part#GC100-01) †Reemplazable por el consumidor 1. Levier de degagement de l’appareil †2. Couteau et levier de fonctionnement (Part#177046-00) 3. Dispositif de degagement du couvercle 4. Patte de positionnement 5. Socle (series GC200) †6. Kit de ferrures de fixation (non montree) (series GC200) (Part# 177451-00) †7. Adaptateur CA (non montre) (Part# GC100-01) † Remplacable par le consommateur Como usar Este producto es solamente para uso domestico. PROCEDIMIENTO DE CARGA 1. Antes de utilizar el abrelatas por primera vez, es necesario cargarlo durante 24 horas. De ahi en mas, puede cargarse segun sea necesario durante 12 horas o durante la noche. Con plena carga, el abrelatas inalambrico Gizmo™ tiene potencia para funcionar durante aproximadamente un mes. Esto equivale a 6 latas por semana (una lata – 20 segundos). 2. Para cargar el abrelatas, conecte el extremo pequeno del adaptador de CA al abrelata...

Herunterladen

Geben Sie zwei Ziffern: